FireCADCalc

Viscosity Converter: Dynamic ↔ Kinematic (cP, cSt, Pa·s, St)

Convert dynamic viscosity between Pa·s, mPa·s (cP), poise and lb/(ft·s), and to kinematic viscosity in m²/s, cSt, stokes and ft²/s with the fluid density.

Inputs

Examples: 50 cP oilWater at 20 °C

Results

Saybolt and Redwood seconds are empirical and need their own tables; this converts absolute units only.

pascal second0.001002Pa·s
centipoise (mPa·s)1.0020cP
poise0.010020P
pound per foot second6.7331e-04lb/(ft·s)
kinematic, m²/s1.0038e-06m²/s
kinematic, centistokes1.0038cSt
kinematic, stokes0.010038St
kinematic, ft²/s1.0805e-05ft²/s

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 cP oil. The inputs, in the units selected above:

InputValue
Dynamic viscosity (choose its unit)50.000 cP
Density890.00 kg/m³

Applying the formula below gives:

ResultValue
pascal second0.050000 Pa·s
centipoise (mPa·s)50.000 cP
poise0.50000 P
pound per foot second0.033598 lb/(ft·s)
kinematic, m²/s5.6180e-05 m²/s
kinematic, centistokes56.180 cSt
kinematic, stokes0.56180 St
kinematic, ft²/s6.0471e-04 ft²/s

Open this example in the calculator and change any input.

Formula

\(\nu = \frac{\mu}{\rho}\)

Variables

Symbol Meaning SI unit
\(\mu\) Dynamic viscosity (choose its unit) Pa·s
\(\rho\) Density kg/m³
\(\nu\) kinematic, m²/s m²/s

Method and standards

Definition.

Where it is used

  • Fuel oil and lube oil data sheets.
  • Pump and pipe calculations.

Common mistakes

  • cP vs cSt without density.
  • Viscosity at the wrong temperature.

Assumptions and limits

  • The input is a dynamic viscosity. To start from a kinematic value (a furnace oil in cSt, say), use the dynamic and kinematic viscosity conversion calculator, which takes either.

  • Newtonian fluid.

References

  • ν = μ/ρ; unit definitions per NIST SP 811

Questions and answers

50 cP oil at 890 kg/m³?

About 56.2 cSt.

Water at 20 °C?

About 1 cP and 1 cSt, because its density is near 1000 kg/m³.

Furnace oil specs in cSt?

Kinematic, at the stated temperature.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.