FireCADCalc

Speed Unit Converter (m/s, km/h, ft/min, mph, knot)

Convert a speed between metres per second, kilometres per hour, metres per minute, feet per second and per minute, miles per hour and knots.

Inputs

Examples: 10 m/sOne knot

Results

km/h ÷ 3.6 = m/s.

metre per second0.51444m/s
kilometre per hour1.8520km/h
metre per minute30.867m/min
foot per second1.6878ft/s
foot per minute101.27ft/min
mile per hour1.1508mph
knot1.00000kn

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 m/s. The inputs, in the units selected above:

InputValue
Speed (choose its unit)10.000 m/s

Applying the formula below gives:

ResultValue
metre per second10.000 m/s
kilometre per hour36.000 km/h
metre per minute600.00 m/min
foot per second32.808 ft/s
foot per minute1,968.5 ft/min
mile per hour22.369 mph
knot19.438 kn

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Speed (choose its unit) m/s

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

10 m/s in km/h?

36 km/h.

Duct velocities in ft/min?

1 m/s is about 196.85 ft/min.

A knot?

One nautical mile per hour, 0.5144 m/s.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.