Worked example
Example: 10 kg/s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mass flow (choose its unit) | 10.000 kg/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| kilogram per second | 10.000 kg/s |
| kilogram per hour | 36,000 kg/h |
| kilogram per day | 864,000 kg/d |
| tonne per hour (TPH) | 36.000 t/h |
| tonne per day | 864.00 t/d |
| pound per hour | 79,366 lb/h |
| pound per second | 22.046 lb/s |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Mass flow (choose its unit) | kg/s |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
10 kg/s in t/h?
36 t/h.
Steam boilers in TPH?
Tonnes of steam per hour: divide by 3.6 for kg/s.
lb/h?
1 t/h is about 2204.6 lb/h.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.