FireCADCalc

Length Unit Converter (mm, m, km, inch, foot, yard, mile)

Convert a length between millimetres, metres, kilometres, microns, inches, feet, yards, miles, nautical miles and mils (thou).

Inputs

Examples: One metreOne mile

Results

The inch is exactly 25.4 mm by international agreement (1959).

metre1,609.3m
millimetre1,609,344mm
micrometre (micron)1.6093e+09µm
centimetre160,934cm
kilometre1.6093km
inch63,360in
foot5,280.0ft
yard1,760.0yd
mile1.0000mi
nautical mile0.86898nmi
mil (thou)6.3360e+07mil

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: One metre. The inputs, in the units selected above:

InputValue
Length (choose its unit)1.0000 m

Applying the formula below gives:

ResultValue
metre1.0000 m
millimetre1,000.0 mm
micrometre (micron)1,000,000 µm
centimetre100.00 cm
kilometre0.001000 km
inch39.370 in
foot3.2808 ft
yard1.0936 yd
mile6.2137e-04 mi
nautical mile5.3996e-04 nmi
mil (thou)39,370 mil

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Length (choose its unit) m

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

How many millimetres in an inch?

Exactly 25.4.

A mile?

1609.344 m exactly; a nautical mile is 1852 m.

A mil?

One thousandth of an inch: 25.4 µm, used for coatings and clearances.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.