FireCADCalc

Weibull Reliability, Hazard Rate, Mean Life and B10 Life

Reliability, failure probability and hazard rate at a time for a two-parameter Weibull life distribution, with the mean life (MTTF) and B10 life.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: β 1.8, η 20,000 h at 8,000 hBearings β 1.3, η 50,000 h at 20,000 h, B1

Results

β < 1: early (infant) failures; β = 1: random (exponential); β > 1: wear-out. Bearings show β about 1.1–1.5, fatigue and wear 2–4.

Reliability82.516%
Failure probability17.484%
Hazard rate (per hour)4.3240e-05
Mean life17,786h
B life (time by which fraction p fails)5,728.9h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: β 1.8, η 20,000 h at 8,000 h. The inputs, in the units selected above:

InputValue
Shape parameter1.8000 -
Scale (characteristic life)20,000 h
Operating time8,000.0 h
Failure fraction for the B life10.000 %

Applying the formula below gives:

ResultValue
Reliability82.516 %
Failure probability17.484 %
Hazard rate (per hour)4.3240e-05
Mean life17,786 h
B life (time by which fraction p fails)5,728.9 h

Open this example in the calculator and change any input.

Formula

\(R(t) = e^{-(t/\eta)^\beta}, \quad h(t) = \frac\beta\eta\left(\frac t\eta\right)^{\beta - 1}, \quad MTTF = \eta\Gamma\left(1 + \frac1\beta\right), \quad B_p = \eta[-\ln(1 - p)]^{1/\beta}\)

Variables

Symbol Meaning SI unit
\(\beta\) Shape parameter -
\(\eta\) Scale (characteristic life) s
\(t\) Operating time s
\(p\) Failure fraction for the B life -
\(R(t)\) Reliability -
\(F(t)\) Failure probability -
\(h(t)\) Hazard rate (per hour) -
\(MTTF\) Mean life s
\(B_p\) B life (time by which fraction p fails) s

Method and standards

Weibull distribution.

Where it is used

  • Maintenance intervals for pumps, fans and bearings.
  • Spares planning.

Common mistakes

  • Using MTTF as the replacement interval.
  • Fitting β from too few failures.

Assumptions and limits

  • For β < 1 the hazard rate tends to infinity at t = 0; the page leaves it out there and gives it for any t above zero.

  • Two-parameter Weibull.

References

  • Two-parameter Weibull distribution (O'Connor, Practical Reliability Engineering, ch. 2)

Questions and answers

What does the shape parameter tell me?

Whether failures are early, random or wear-out, and so whether preventive replacement helps (only for β > 1).

What is the characteristic life?

The time by which 63.2 % of items have failed, whatever the shape.

What do the defaults represent?

A wear-out component with β = 1.8 and η = 20,000 h, assessed at 8,000 h.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.