Worked example
Example: Six cube results. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number of values used | 6.0000 - |
| Value 1 | 31.200 - |
| Value 2 | 29.800 - |
| Value 3 | 32.500 - |
| Value 4 | 30.100 - |
| Value 5 | 33.000 - |
| Value 6 | 28.900 - |
| Value 7 | 0 - |
| Value 8 | 0 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mean | 30.917 |
| Sample standard deviation (n − 1) | 1.6068 |
| Population standard deviation (n) | 1.4668 |
| Coefficient of variation s/x̄ | 5.1971 % |
| Minimum | 28.900 |
| Maximum | 33.000 |
Open this example in the calculator and change any input.
Formula
\(\bar x = \frac{1}{n}\sum x_i, \quad s = \sqrt{\frac{\sum(x_i - \bar x)^2}{n - 1}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n\) | Number of values used | - |
| \(x_{1}\) | Value 1 | - |
| \(x_{2}\) | Value 2 | - |
| \(x_{3}\) | Value 3 | - |
| \(x_{4}\) | Value 4 | - |
| \(x_{5}\) | Value 5 | - |
| \(x_{6}\) | Value 6 | - |
| \(x_{7}\) | Value 7 | - |
| \(x_{8}\) | Value 8 | - |
| \(\bar x\) | Mean | - |
| \(s\) | Sample standard deviation (n − 1) | - |
| \(\sigma\) | Population standard deviation (n) | - |
| \(CV\) | Coefficient of variation s/x̄ | - |
| \(x_{min}\) | Minimum | - |
| \(x_{max}\) | Maximum | - |
Method and standards
Descriptive statistics.
Where it is used
- Test result analysis (cubes, coal samples, meter checks).
- Quality control.
Common mistakes
- Population SD for small samples.
- Including blank fields.
Assumptions and limits
- Independent values.
- With a zero mean the coefficient of variation is not defined and is not shown.
References
- Descriptive statistics; sample SD with n − 1 (Bessel)
Questions and answers
Six cube results 31.2 … 28.9 MPa?
Mean 30.92, sample SD 1.61.
Sample or population?
Sample (n − 1) when the values are a sample of a larger lot.
CV?
SD relative to the mean: compares spreads of different sizes.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.