FireCADCalc

Percentage Change, Difference and Error Calculator

Percentage change from an old to a new value, percentage error of a measured value against the true value, and the percentage difference between two values.

Inputs

Examples: Efficiency 80 to 86 %Measured 98.2 against true 100Fall from -20 to -25

Results

Percentage points are not percentages: a rise in efficiency from 80 % to 86 % is 6 points, or 7.5 %.

Change V₂ − V₁6.0000
Percentage change (V₂ − V₁) / |V₁|7.5000%
Percentage error |V₂ − V₁| / |V₁|7.5000%
Percentage difference |V₂ − V₁| / mean7.2289%
Ratio1.0750

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Efficiency 80 to 86 %. The inputs, in the units selected above:

InputValue
Old, reference or true value80.000 -
New or measured value86.000 -

Applying the formula below gives:

ResultValue
Change V₂ − V₁6.0000
Percentage change (V₂ − V₁) / |V₁|7.5000 %
Percentage error |V₂ − V₁| / |V₁|7.5000 %
Percentage difference |V₂ − V₁| / mean7.2289 %
Ratio1.0750

Open this example in the calculator and change any input.

Formula

\(\delta = \frac{V_2 - V_1}{|V_1|}, \quad \delta_{abs} = \frac{|V_2 - V_1|}{|V_1|}, \quad \delta_m = \frac{|V_2 - V_1|}{(|V_1| + |V_2|)/2}\)

Variables

Symbol Meaning SI unit
\(V_1\) Old, reference or true value -
\(V_2\) New or measured value -
\(\Delta V\) Change V₂ − V₁ -
\(\delta\) Percentage change (V₂ − V₁) / V₁ -
\(\delta_{abs}\) Percentage error V₂ − V₁ / V₁ -
\(\delta_m\) Percentage difference V₂ − V₁ / mean -
\(V_2/V_1\) Ratio -

Method and standards

Standard definitions.

Where it is used

  • Reporting savings and losses.
  • Instrument checks.
  • Efficiency improvements.

Common mistakes

  • Mixing percentage points and percent.
  • Using the wrong base.

Assumptions and limits

  • Reference value not zero.

References

  • Definitions of relative change and relative error

Questions and answers

Efficiency rises from 80 % to 86 %: what is the change?

6 percentage points, which is 7.5 % of 80.

What is the error of 98.2 against a true 100?

1.8 %.

Percentage change or difference?

Change uses the old value as the base; difference uses the mean of the two.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.