FireCADCalc

Area under Tabulated Data (Trapezoidal and Simpson's Rule)

Integral of equally spaced tabulated values (up to nine) by the trapezoidal rule and Simpson's rule, for areas, volumes and totals from readings.

Inputs

Examples: Seven ordinatesEven count: trapezoid only

Results

Trapezoidal rule40.200
Simpson's rule (trapezoidal if the count is even)40.800

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Seven ordinates. The inputs, in the units selected above:

InputValue
Number of ordinates (Simpson needs an odd number)7.0000 -
Spacing between ordinates2.0000 -
Ordinate 10 -
Ordinate 22.1000 -
Ordinate 33.6000 -
Ordinate 44.4000 -
Ordinate 54.6000 -
Ordinate 64.0000 -
Ordinate 72.8000 -
Ordinate 80 -
Ordinate 90 -

Applying the formula below gives:

ResultValue
Trapezoidal rule40.200
Simpson's rule (trapezoidal if the count is even)40.800

Open this example in the calculator and change any input.

Formula

\(I_T = h\left[\frac{y_0 + y_n}{2} + \sum y_i\right], \quad I_S = \frac{h}{3}\left[y_0 + y_n + 4\sum y_{odd} + 2\sum y_{even}\right]\)

Variables

Symbol Meaning SI unit
\(n\) Number of ordinates (Simpson needs an odd number) -
\(h\) Spacing between ordinates -
\(y_{1}\) Ordinate 1 -
\(y_{2}\) Ordinate 2 -
\(y_{3}\) Ordinate 3 -
\(y_{4}\) Ordinate 4 -
\(y_{5}\) Ordinate 5 -
\(y_{6}\) Ordinate 6 -
\(y_{7}\) Ordinate 7 -
\(y_{8}\) Ordinate 8 -
\(y_{9}\) Ordinate 9 -
\(I_T\) Trapezoidal rule -
\(I_S\) Simpson's rule (trapezoidal if the count is even) -

Method and standards

Numerical integration.

Where it is used

  • Survey offsets and cross-sections.
  • Totalising logged readings.

Common mistakes

  • Even count with Simpson.
  • Unequal spacing.

Assumptions and limits

  • Equally spaced ordinates.

References

  • Trapezoidal rule; Simpson's one-third rule

Questions and answers

Seven ordinates 0 … 2.8 at spacing 2?

Simpson 40.800, trapezoidal 40.200.

Uses?

Areas of irregular plots, flow totals from readings, indicator diagrams.

Which is better?

Simpson for smooth curves; both converge as spacing shrinks.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.