FireCADCalc

Volume and Surface Area of Solids

Volume and total surface area of a cylinder, cone, frustum, sphere, rectangular box, square pyramid or hemisphere from its dimensions.

Inputs

Examples: Cylinder 2 x 1Cone 2 x 1Frustum 2 and 1, 1.5 highSphere 2Box 1 x 2 x 3Square pyramid 2, 3 highHemisphere 2

Results

Surface areas include the flat ends and bases.

Volume4.1888m³
Total surface area12.566m²

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Cylinder 2 x 1. The inputs, in the units selected above:

InputValue
SolidCylinder (diameter a, height b)
Dimension a2.0000 m
Dimension b1.0000 m
Dimension c0 m

Applying the formula below gives:

ResultValue
Volume3.1416 m³
Total surface area12.566 m²

Open this example in the calculator and change any input.

Formula

With \(a, b, c\) as listed for each solid (\(R = a/2\), \(r = b/2\) for the frustum):

\(\text{Cylinder: } V = \frac{\pi a^2 b}{4}, \quad S = \pi a b + \frac{\pi a^2}{2}\)

\(\text{Cone: } V = \frac{\pi a^2 b}{12}, \quad S = \frac{\pi a}{2}\left(\frac a2 + \sqrt{\frac{a^2}{4} + b^2}\right)\)

\(\text{Frustum: } V = \frac{\pi c}{3}(R^2 + Rr + r^2), \quad S = \pi(R + r)\sqrt{(R - r)^2 + c^2} + \pi(R^2 + r^2)\)

\(\text{Sphere: } V = \frac{\pi a^3}{6}, \quad S = \pi a^2; \qquad \text{Hemisphere: } V = \frac{\pi a^3}{12}, \quad S = \frac{3\pi a^2}{4}\)

\(\text{Box: } V = abc, \quad S = 2(ab + bc + ac); \qquad \text{Square pyramid: } V = \frac{a^2 b}{3}, \quad S = a^2 + 2a\sqrt{\frac{a^2}{4} + b^2}\)

Variables

Symbol Meaning SI unit
\(\text{solid}\) Solid -
\(a\) Dimension a m
\(b\) Dimension b m
\(c\) Dimension c m
\(R, r\) Frustum end radii a/2 and b/2 m
\(V\) Volume m³
\(S\) Total surface area m²

Method and standards

Solid geometry.

Where it is used

  • Hoppers, tanks and bunkers.
  • Paint and insulation areas.

Common mistakes

  • Radius for diameter.
  • Forgetting the ends.

Assumptions and limits

  • Ideal shapes.

References

  • Solid geometry

Questions and answers

Frustum with 2 m and 1 m diameters, 1.5 m high?

Volume 2.749 m³.

Cone 2 m base, 1 m high?

Volume 1.047 m³.

Open tanks?

Subtract the top area from the total surface.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.