Worked example
Example: Cylinder 2 x 1. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Solid | Cylinder (diameter a, height b) |
| Dimension a | 2.0000 m |
| Dimension b | 1.0000 m |
| Dimension c | 0 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Volume | 3.1416 m³ |
| Total surface area | 12.566 m² |
Open this example in the calculator and change any input.
Formula
With \(a, b, c\) as listed for each solid (\(R = a/2\), \(r = b/2\) for the frustum):
\(\text{Cylinder: } V = \frac{\pi a^2 b}{4}, \quad S = \pi a b + \frac{\pi a^2}{2}\)
\(\text{Cone: } V = \frac{\pi a^2 b}{12}, \quad S = \frac{\pi a}{2}\left(\frac a2 + \sqrt{\frac{a^2}{4} + b^2}\right)\)
\(\text{Frustum: } V = \frac{\pi c}{3}(R^2 + Rr + r^2), \quad S = \pi(R + r)\sqrt{(R - r)^2 + c^2} + \pi(R^2 + r^2)\)
\(\text{Sphere: } V = \frac{\pi a^3}{6}, \quad S = \pi a^2; \qquad \text{Hemisphere: } V = \frac{\pi a^3}{12}, \quad S = \frac{3\pi a^2}{4}\)
\(\text{Box: } V = abc, \quad S = 2(ab + bc + ac); \qquad \text{Square pyramid: } V = \frac{a^2 b}{3}, \quad S = a^2 + 2a\sqrt{\frac{a^2}{4} + b^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{solid}\) | Solid | - |
| \(a\) | Dimension a | m |
| \(b\) | Dimension b | m |
| \(c\) | Dimension c | m |
| \(R, r\) | Frustum end radii a/2 and b/2 | m |
| \(V\) | Volume | m³ |
| \(S\) | Total surface area | m² |
Method and standards
Solid geometry.
Where it is used
- Hoppers, tanks and bunkers.
- Paint and insulation areas.
Common mistakes
- Radius for diameter.
- Forgetting the ends.
Assumptions and limits
- Ideal shapes.
References
- Solid geometry
Questions and answers
Frustum with 2 m and 1 m diameters, 1.5 m high?
Volume 2.749 m³.
Cone 2 m base, 1 m high?
Volume 1.047 m³.
Open tanks?
Subtract the top area from the total surface.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.