FireCADCalc

Life-Cycle Cost of Equipment (Present Value)

Present-value life-cycle cost of equipment from capital cost, escalating energy and maintenance costs, a mid-life replacement and salvage value over its life.

Hydraulic Institute (pumps)

Inputs

Examples: Pump set, 15 yearsEscalation equal to discount

Results

For pumps, fans and motors the energy usually dwarfs the purchase price: compare options on LCC.

Life-cycle cost (present value)4,240,741
Present value of energy2,777,778
Energy share of the LCC65.502%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Pump set, 15 years. The inputs, in the units selected above:

InputValue
Capital cost (installed)2,500,000 -
Energy cost in year 11,200,000 -
Energy cost escalation5.0000 %
Maintenance cost in year 1100,000 -
Maintenance escalation4.0000 %
Discount rate10.000 %
Life (whole years)15.000 -
Replacement or overhaul cost (in the year it is spent)400,000 -
Year of the replacement (0 if none)8.0000 -
Salvage value at end of life100,000 -

Applying the formula below gives:

ResultValue
Life-cycle cost (present value)1.5666e+07
Present value of energy1.2056e+07
Energy share of the LCC76.952 %

Open this example in the calculator and change any input.

Formula

\(LCC = C_0 + \sum_{k=1}^{n}\frac{E_1(1 + e_E)^{k-1} + M_1(1 + e_M)^{k-1}}{(1 + d)^k} + \frac{R}{(1 + d)^{n_R}} - \frac{S}{(1 + d)^n}\)

The replacement term is counted only when \(0 < n_R < n\).

Variables

Symbol Meaning SI unit
\(C_0\) Capital cost (installed) -
\(E_1\) Energy cost in year 1 -
\(e_E\) Energy cost escalation -
\(M_1\) Maintenance cost in year 1 -
\(e_M\) Maintenance escalation -
\(d\) Discount rate -
\(n\) Life (whole years) -
\(R\) Replacement or overhaul cost (in the year it is spent) -
\(n_R\) Year of the replacement (0 if none) -
\(S\) Salvage value at end of life -
\(LCC\) Life-cycle cost (present value) -
\(PV_E\) Present value of energy -
\(x_E\) Energy share of the LCC -

Method and standards

Present value.

Where it is used

  • Pump, fan and motor selection.
  • Boiler and chiller options.

Common mistakes

  • Undiscounted totals.
  • Mixing nominal and real rates.

Assumptions and limits

  • End-of-year cash flows.

References

  • Present-value life-cycle cost with growing annuities (Hydraulic Institute/Europump pump LCC approach)

Questions and answers

What does the default pump give?

About 15,666,485, with energy 77 % of it.

Why escalate costs?

Energy and labour prices rise faster than general inflation at times.

Comparing different lives?

Use the equivalent annual cost.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.