FireCADCalc

Discounted Payback Period with Escalating Savings

Years until discounted savings repay an investment, with savings that escalate each year, against the simple payback.

Inputs

Examples: Escalating savings at 12 %Flat savings at 8 %

Results

End-of-year savings, interpolated within the final year.

Discounted payback (years)6.6463
Simple payback (years)5.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Escalating savings at 12 %. The inputs, in the units selected above:

InputValue
Investment1,200,000 -
Saving in year 1420,000 -
Saving escalation per year5.0000 %
Discount rate12.000 %

Applying the formula below gives:

ResultValue
Discounted payback (years)3.4655
Simple payback (years)2.8571

Open this example in the calculator and change any input.

Formula

\(\sum_{k=1}^{t}\frac{S_1(1 + e)^{k-1}}{(1 + d)^k} = I\)

Variables

Symbol Meaning SI unit
\(I\) Investment -
\(S_1\) Saving in year 1 -
\(e\) Saving escalation per year -
\(d\) Discount rate -
\(t_{dpb}\) Discounted payback (years) -
\(t_{pb}\) Simple payback (years) -

Method and standards

Cumulative present value.

Where it is used

  • Energy project appraisal.
  • Comparing with company hurdle periods.

Common mistakes

  • Discounting from year 0.
  • Ignoring escalation.

Assumptions and limits

  • End-of-year flows.

References

  • Discounted payback: first year where cumulative discounted savings equal the investment

Questions and answers

1.2 million, saving 4.2 lakh rising 5 % a year, 12 % discount?

About 3.47 years against 2.86 simple.

Never repays?

If escalation-adjusted savings shrink fast enough, the sum stays below the cost.

Which rate?

Your company's cost of capital or hurdle rate.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.