FireCADCalc

Paint Quantity for Walls and Ceilings

Litres of paint and primer for an area from the spreading rate (coverage) and number of coats, with the cans needed, for walls, ceilings and steelwork.

Inputs

Examples: 250 m2, two coatsCeiling 80 m2, no primerSteelwork 500 m2, three coats

From the paint maker's data sheet for the surface.

Results

Finish paint55.000L
Primer22.917L
Cans of finish paint (rounded up)3.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 250 m2, two coats. The inputs, in the units selected above:

InputValue
Area to paint250.00 m²
Spreading rate per coat10.000 m²/L
Number of finish coats2.0000 -
Primer spreading rate12.000 m²/L
Primer coats1.0000 -
Can size20.000 L
Loss allowance10.000 %

Applying the formula below gives:

ResultValue
Finish paint55.000 L
Primer22.917 L
Cans of finish paint (rounded up)3.0000

Open this example in the calculator and change any input.

Formula

\(V = \frac{A\, n}{c}(1 + k_w)\)

Variables

Symbol Meaning SI unit
\(A\) Area to paint m²
\(c\) Spreading rate per coat (m² per litre) -
\(n\) Number of finish coats -
\(c_p\) Primer spreading rate (m² per litre) -
\(n_p\) Primer coats -
\(V_c\) Can size m³
\(k_w\) Loss allowance -
\(V_f\) Finish paint m³
\(V_p\) Primer m³
\(N_c\) Cans of finish paint (rounded up) -

Method and standards

Area per litre.

Where it is used

  • Painting estimates.
  • Maintenance budgets.

Common mistakes

  • Ignoring primer.
  • Theoretical coverage on rough surfaces.

Assumptions and limits

  • Uniform surface.
  • Spreading rates are entered in m² per litre in every unit system; convert ft²/US gal by × 0.0245.

References

  • Area × coats / spreading rate (Common site practice (quantity estimating))

Questions and answers

250 m², two coats at 10 m²/L, 10 % allowance?

55 L of finish paint, 3 cans of 20 L; primer about 23 L.

Where is the spreading rate?

On the data sheet; rough or porous surfaces take more.

Steelwork?

Use the dry film thickness and volume solids to find the rate.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.