Worked example
Example: Clayey sand, partly saturated. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Water content (of dry mass) | 18.000 % |
| Specific gravity of the solids | 2.6800 - |
| Bulk density | 1,950.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dry density ρ/(1 + w) | 1,652.5 kg/m³ |
| Void ratio G_s ρ_w/ρ_d − 1 | 0.62174 |
| Porosity e/(1 + e) | 38.338 % |
| Degree of saturation w G_s/e | 77.588 % |
| Air content n(1 − S_r) | 8.5922 % |
| Bulk unit weight | 19.123 kN/m³ |
| Saturated unit weight | 19.966 kN/m³ |
| Submerged unit weight | 10.159 kN/m³ |
Open this example in the calculator and change any input.
Formula
\(\rho_d = \frac{\rho}{1 + w}, \quad e = \frac{G_s \rho_w}{\rho_d} - 1, \quad n = \frac{e}{1 + e}, \quad S_r = \frac{w G_s}{e}, \quad \gamma_{sat} = \frac{(G_s + e)\rho_w g}{1 + e}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(w\) | Water content (of dry mass) | - |
| \(G_s\) | Specific gravity of the solids | - |
| \(\rho\) | Bulk density | kg/m³ |
| \(\rho_d\) | Dry density ρ/(1 + w) | kg/m³ |
| \(e\) | Void ratio G_s ρ_w/ρ_d − 1 | - |
| \(n\) | Porosity e/(1 + e) | - |
| \(S_r\) | Degree of saturation w G_s/e | - |
| \(a_c\) | Air content n(1 − S_r) | - |
| \(\gamma\) | Bulk unit weight | N/m³ |
| \(\gamma_{sat}\) | Saturated unit weight | N/m³ |
| \(\gamma'\) | Submerged unit weight | N/m³ |
Method and standards
Phase diagram relations.
Where it is used
- Soil investigation reports.
- Earthwork and foundation design.
Common mistakes
- Water content on wet mass.
- Gs of 2.65 assumed for every soil.
Assumptions and limits
- Water density 1000 kg/m³.
References
- Three-phase soil relations (Das, Principles of Geotechnical Engineering; Craig, Soil Mechanics)
Questions and answers
w 18 %, Gs 2.68, bulk 1950 kg/m³?
Dry density 1653 kg/m³, void ratio 0.622, saturation 78 %.
Why is water content on dry mass?
Soil mechanics convention: the solids mass does not change.
What is the submerged unit weight for?
Effective stress below the water table.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.