Worked example
Example: 25 degrees, half saturated. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Slope angle | 25.000 ° |
| Depth of the slip plane | 3.0000 m |
| Effective cohesion | 5.0000 kPa |
| Effective friction angle | 32.000 ° |
| Unit weight of the soil | 19.000 kN/m³ |
| Height of the water table above the slip plane, share of z | 50.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Shear stress on the plane | 21.832 kPa |
| Effective normal stress | 34.737 kPa |
| Factor of safety | 1.2232 |
Open this example in the calculator and change any input.
Formula
\(FS = \frac{c' + (\gamma z \cos^2\beta - m z \gamma_w \cos^2\beta)\tan\phi'}{\gamma z \sin\beta\cos\beta}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\beta\) | Slope angle | rad |
| \(z\) | Depth of the slip plane | m |
| \(c'\) | Effective cohesion | Pa |
| \(\phi'\) | Effective friction angle | rad |
| \(\gamma\) | Unit weight of the soil | N/m³ |
| \(m\) | Height of the water table above the slip plane, share of z | - |
| \(\tau\) | Shear stress on the plane | Pa |
| \(\sigma'_n\) | Effective normal stress | Pa |
| \(FS\) | Factor of safety | - |
Method and standards
Limit equilibrium on a plane parallel to the slope.
Where it is used
- Cut and natural slopes.
- Ash pond and coal yard slopes.
Common mistakes
- Ignoring pore pressure.
- Using it for short slopes.
Assumptions and limits
- Long uniform slope.
References
- Infinite slope analysis with slope-parallel seepage (Das; Duncan and Wright, Soil Strength and Slope Stability)
Questions and answers
25° slope, 3 m deep, c' 5 kPa, φ' 32°, half saturated?
FS about 1.22 with the default 19 kN/m³.
Dry cohesionless slope?
FS = tan φ'/tan β, independent of depth.
Full seepage?
FS roughly halves for sands.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.