FireCADCalc

Vertical Stress Below a Point Load (Boussinesq)

Vertical stress increase at a depth and radial distance below a point load on the ground surface by Boussinesq's solution, with the influence factor.

Inputs

Examples: 500 kN, 3 m deep, 1.5 m offDirectly belowFar off

Results

Influence factor (3/2π)/(1 + (r/z)²)^{5/2}0.47746
Vertical stress increase11.937kPa

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 500 kN, 3 m deep, 1.5 m off. The inputs, in the units selected above:

InputValue
Point load500.00 kN
Depth3.0000 m
Radial distance from the load line1.5000 m

Applying the formula below gives:

ResultValue
Influence factor (3/2π)/(1 + (r/z)²)^{5/2}0.27332
Vertical stress increase15.184 kPa

Open this example in the calculator and change any input.

Formula

\(\Delta\sigma_z = \frac{3P}{2\pi z^2}\left[1 + \left(\frac{r}{z}\right)^2\right]^{-5/2}\)

Variables

Symbol Meaning SI unit
\(P\) Point load N
\(z\) Depth m
\(r\) Radial distance from the load line m
\(I_B\) Influence factor (3/2π)/(1 + (r/z)²)^{5/2} -
\(\Delta\sigma_z\) Vertical stress increase Pa

Method and standards

Elastic half-space.

Where it is used

  • Stress under machine and tank loads.
  • Settlement input.

Common mistakes

  • Using it at very shallow depth.
  • Ignoring nearby loads.

Assumptions and limits

  • Homogeneous isotropic elastic half-space.

References

  • Boussinesq (1885) elastic half-space solution

Questions and answers

500 kN at 3 m depth, 1.5 m off the line?

I_B 0.2733: about 15.2 kPa.

Footings?

Split them into point loads, or use a rectangular-area solution.

Is the soil really elastic?

No, but stress increase is reasonably predicted.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.