Worked example
Example: 100 bars of 12 mm x 12 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Bar diameter | 12.000 mm |
| Length of one bar | 12.000 m |
| Number of bars | 100.00 - |
| Density of steel | 7,850.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass per metre ρ π d² / 4 | 0.88781 kg/m |
| Mass per metre by the site rule d²/162 | 0.88889 kg/m |
| Mass of one bar | 10.654 kg |
| Total mass | 1,065.4 kg |
Open this example in the calculator and change any input.
Formula
\(w = \rho\, \frac{\pi d^2}{4}, \quad w_{162} = \frac{d_{mm}^2}{162}\ \text{kg/m}\)
\(m = w\, L\, n\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(d\) | Bar diameter | m |
| \(L\) | Length of one bar | m |
| \(n\) | Number of bars | - |
| \(\rho\) | Density of steel | kg/m³ |
| \(w\) | Mass per metre ρ π d² / 4 | kg/m |
| \(w_{162}\) | Mass per metre by the site rule d²/162 | kg/m |
| \(m_1\) | Mass of one bar | kg |
| \(m\) | Total mass | kg |
Method and standards
Mass of a round bar of steel at 7850 kg/m³.
Where it is used
- Bar bending schedules.
- Steel ordering.
- Site checks.
Common mistakes
- Leaving out laps and wastage.
- Mixing mm and m.
Assumptions and limits
- Nominal diameter.
- The site rule d²/162 is fixed to steel at 7850 kg/m³; if you enter another density only the exact result w follows it.
References
- Mass of a round bar ρπd²/4; site rule d²/162 (d in mm)
Questions and answers
What does a 12 mm bar weigh per metre?
0.888 kg/m (rule 0.889). 100 bars of 12 m weigh 1065 kg.
Where does 162 come from?
10⁶ / (7850 × π/4) = 162.2; rounded to 162.
Is the rule accurate?
It reads 0.1 % high; rolling tolerances are larger.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.