FireCADCalc

Fuel Saving from a Boiler Efficiency Improvement

Fuel saved per hour and per year and the cost saving when boiler efficiency rises from one value to another at the same steam output.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolBoiler

Inputs

Examples: 78 to 82 %One point

Results

A rise of one point from 78 to 79 % saves about 1.3 % of fuel, not 1 %: the saving is 1 − η₁/η₂.

Fuel rate after4.7561t/h
Fuel saved0.24390t/h
Fuel saved per year1,951.2t
Cost saving per year1.7561e+07
Fuel saving4.8780%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 78 to 82 %. The inputs, in the units selected above:

InputValue
Fuel rate now5.0000 t/h
Efficiency now78.000 %
Efficiency after improvement82.000 %
Operating hours per year8,000.0 h
Fuel price per tonne9,000.0 -

Applying the formula below gives:

ResultValue
Fuel rate after4.7561 t/h
Fuel saved0.24390 t/h
Fuel saved per year1,951.2 t
Cost saving per year1.7561e+07
Fuel saving4.8780 %

Open this example in the calculator and change any input.

Formula

\(\dot m_{f,2} = \dot m_f \frac{\eta_1}{\eta_2}, \quad \frac{\Delta \dot m_f}{\dot m_f} = 1 - \frac{\eta_1}{\eta_2}\)

Variables

Symbol Meaning SI unit
\(\dot m_f\) Fuel rate now kg/s
\(\eta_1\) Efficiency now -
\(\eta_2\) Efficiency after improvement -
\(t\) Operating hours per year s
\(c\) Fuel price per tonne -
\(\dot m_{f,2}\) Fuel rate after kg/s
\(\Delta\dot m_f\) Fuel saved kg/s
\(\Delta M\) Fuel saved per year kg
\(\Delta C\) Cost saving per year -
\(\Delta\dot m_f/\dot m_f\) Fuel saving -

Method and standards

Heat balance.

Where it is used

  • Energy-saving project justification.

Common mistakes

  • Saving taken as η₂ − η₁.

Assumptions and limits

  • Same output and fuel. If the efficiency after is lower, the result is negative: extra fuel, with a note.

References

  • Same useful heat: ṁ_f2 = ṁ_f1 η₁/η₂

Questions and answers

Why is the saving more than the efficiency points?

Fuel varies with 1/η, so the saving is (η₂ − η₁)/η₂, slightly more than the points gained divided by 100.

Same basis?

Use efficiencies on the same calorific-value basis.

Currency?

Any, per tonne of fuel.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.