FireCADCalc

Boiler House Auxiliary Power from Drive Loads

Total boiler-house auxiliary power from fans, feed pumps and other drives, and the specific power in kWh per tonne of steam.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolBoilerPumpFan and blower

Inputs

Examples: 100 t/h bagasse boilerSmall oil boiler

Results

Total auxiliary power65.000kW
Auxiliary power per tonne of steam6.5000kWh/t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 t/h bagasse boiler. The inputs, in the units selected above:

InputValue
FD fan250.00 kW
ID fan450.00 kW
Secondary / PA fans120.00 kW
Boiler feed pumps400.00 kW
Others (feeders, ash, ESP, water treatment)180.00 kW
Steam generated100.00 t/h

Applying the formula below gives:

ResultValue
Total auxiliary power1,400.0 kW
Auxiliary power per tonne of steam14.000 kWh/t

Open this example in the calculator and change any input.

Formula

\(P = \Sigma P_i, \quad e = \frac{P}{\dot m_s}\)

Variables

Symbol Meaning SI unit
\(P_{FD}\) FD fan W
\(P_{ID}\) ID fan W
\(P_{SA}\) Secondary / PA fans W
\(P_{BFP}\) Boiler feed pumps W
\(P_o\) Others (feeders, ash, ESP, water treatment) W
\(\dot m_s\) Steam generated kg/s
\(P\) Total auxiliary power W
\(e\) Auxiliary power per tonne of steam J/kg

Method and standards

Definitions.

Where it is used

  • Energy audits.
  • Cogeneration net export.

Common mistakes

  • Rated motor power used instead of measured.

Assumptions and limits

  • Measured loads.

References

  • Definitions (sum of drives; kWh/t = kW ÷ t/h)

Questions and answers

Typical figure?

Roughly 12–30 kWh per tonne of steam for solid-fuel boilers; more with ESP and wet scrubbers.

Biggest consumers?

ID fan and feed pumps.

How to cut it?

VFDs on fans and pumps, lower excess air and tighter ducts.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.