Worked example
Example: Turbocharged six. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Measured air flow | 648.00 kg/h |
| Intake air density (ambient or manifold) | 1.1800 kg/m³ |
| Bore | 105.00 mm |
| Stroke | 120.00 mm |
| Cylinders | 6.0000 - |
| Speed | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Swept volume rate V_s N/2 | 280.55 m³/h |
| Volumetric efficiency | 195.74 % |
Open this example in the calculator and change any input.
Formula
\(\eta_v = \frac{\dot m_a}{\rho_a V_s N/2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_a\) | Measured air flow | kg/s |
| \(\rho_a\) | Intake air density (ambient or manifold) | kg/m³ |
| \(B\) | Bore | m |
| \(S\) | Stroke | m |
| \(z\) | Cylinders | - |
| \(N\) | Speed | 1/s |
| \(\dot V_s\) | Swept volume rate V_s N/2 | m³/s |
| \(\eta_v\) | Volumetric efficiency | - |
Method and standards
Definition.
Where it is used
- Engine testing and diagnostics.
- Examinations.
Common mistakes
- Forgetting N/2 for four-stroke.
- Wrong density reference.
Assumptions and limits
- Four-stroke engine (two-stroke engines are not covered: their swept volume rate is V_s N).
- With ambient density a value above 100 % shows boost; with manifold density a boosted engine normally reads below 100 %.
References
- η_v = ṁ_a/(ρ_a V_s N/2) for four-stroke engines
Questions and answers
0.18 kg/s into a 6.23 L engine at 1500 rpm?
About 196 % (above 100 % means boost).
Which density?
Ambient density gives the overall breathing; manifold density the cylinder filling.
Two-stroke?
Uses a different definition (delivery ratio).
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.