Worked example
Example: 2 L four-stroke, 250 N·m at 4,000 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Brake torque | 250.00 N·m |
| Total displacement | 2.0000 L |
| Cycle | Four-stroke |
| Speed | 4,000.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Brake mean effective pressure | 15.708 bar |
| Brake power | 104.72 kW |
| Torque per litre (N·m/L) | 125.00 |
Open this example in the calculator and change any input.
Formula
\(bmep = \frac{2\pi n_RT}{V_d}, \quad P_b = 2\pi nT\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Brake torque | N·m |
| \(V_d\) | Total displacement | m³ |
| \(\text{cycle}\) | Cycle | - |
| \(n\) | Speed | 1/s |
| \(n_R\) | Revolutions per power stroke: 2 for four-stroke, 1 for two-stroke (from the cycle) | - |
| \(bmep\) | Brake mean effective pressure | Pa |
| \(P_b\) | Brake power | W |
| \(T/V_d\) | Torque per litre (N·m/L) | - |
Method and standards
Definition.
Where it is used
- Engine comparison and selection.
- DG set and gas engine checks.
Common mistakes
- Mixing per-cylinder and total displacement.
- Wrong n_R for two-strokes.
Assumptions and limits
- Brake (shaft) values.
- A bmep above about 30 bar is flagged as beyond typical engines.
References
- bmep = 2πn_RT/V_d (Heywood, Internal Combustion Engine Fundamentals (McGraw-Hill, 1988), ch. 2)
Questions and answers
Why use bmep?
It removes engine size: engines of any displacement can be compared for how hard they work each cycle.
Why does the stroke count matter?
A four-stroke engine fires once every two revolutions; a two-stroke fires every revolution.
What do the defaults represent?
A 2 L four-stroke engine producing 250 N·m at 4,000 rpm.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.