Worked example
Example: Lab engine 600 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Dead load (mass hung on the rope; force = W g) | 60.000 kg |
| Spring balance reading (in kg, i.e. kgf; force = S g) | 8.0000 kg |
| Brake drum diameter | 0.80000 m |
| Rope diameter | 20.000 mm |
| Engine speed | 600.00 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Brake torque (W − S) g (D + d)/2 | 209.08 N·m |
| Brake power | 13.137 kW |
Open this example in the calculator and change any input.
Formula
\(T = (W - S)g\frac{D + d}{2}, \quad BP = 2\pi N T\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W\) | Dead load (mass hung on the rope; force = W g) | kg |
| \(S\) | Spring balance reading (in kg, i.e. kgf; force = S g) | kg |
| \(D\) | Brake drum diameter | m |
| \(d\) | Rope diameter | m |
| \(N\) | Engine speed | 1/s |
| \(T\) | Brake torque (W − S) g (D + d)/2 | N·m |
| \(BP\) | Brake power | W |
Method and standards
Statics.
Where it is used
- Engine testing laboratories.
- BOE and engineering examinations.
Common mistakes
- Drum radius without the rope.
- rpm in the formula without /60.
Assumptions and limits
- Steady speed.
- Dead load and spring reading are entered as masses (kg, or the kgf the balance reads) and turned into forces with standard gravity.
References
- Rope brake: T = (W − S)g(D + d)/2; BP = 2πNT
Questions and answers
60 kg load, 8 kg spring, 0.8 m drum, 20 mm rope, 600 rpm?
Torque 209.1 N·m, BP 13.14 kW.
Why add the rope diameter?
The load acts at the rope's centre line.
Cooling?
Rope brakes heat up; water-cool the drum in long tests.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.