Worked example
Example: 62 / 50 kW. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Indicated power | 62.000 kW |
| Brake power | 50.000 kW |
| Fuel heat input (0 to skip) | 147.60 kW |
Applying the formula below gives:
| Result | Value |
|---|---|
| Friction power IP − BP | 12.000 kW |
| Mechanical efficiency BP/IP | 80.645 % |
| Indicated thermal efficiency | 42.005 % |
Open this example in the calculator and change any input.
Formula
\(FP = IP - BP, \quad \eta_m = \frac{BP}{IP}, \quad \eta_{it} = \frac{IP}{\dot Q_f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(IP\) | Indicated power | W |
| \(BP\) | Brake power | W |
| \(\dot Q_f\) | Fuel heat input (0 to skip) | W |
| \(FP\) | Friction power IP − BP | W |
| \(\eta_m\) | Mechanical efficiency BP/IP | - |
| \(\eta_{it}\) | Indicated thermal efficiency | - |
Method and standards
Definitions.
Where it is used
- Engine testing.
- BOE and engineering examinations.
Common mistakes
- Brake efficiency for indicated.
- Mixing units.
Assumptions and limits
- Steady running.
References
- η_m = BP/IP; FP = IP − BP
Questions and answers
62 kW indicated, 50 kW brake?
Friction 12 kW: mechanical efficiency 80.6 %.
Indicated power?
From an indicator diagram or the Morse test.
Part load?
Friction stays about constant, so η_m falls.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.