Worked example
Example: Default test. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fuel flow | 12.500 kg/h |
| Fuel calorific value (net, NCV) | 42.500 MJ/kg |
| Brake power | 50.000 kW |
| Cooling water flow | 1,800.0 kg/h |
| Cooling water temperature rise | 18.000 K |
| Exhaust gas flow | 432.00 kg/h |
| Exhaust specific heat | 1.0500 kJ/(kg·K) |
| Exhaust temperature | 450.00 °C |
| Ambient (reference) temperature | 30.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fuel heat | 147.57 kW |
| Heat to cooling water | 37.681 kW |
| Heat in the exhaust | 52.920 kW |
| Unaccounted (radiation and other) | 6.9682 kW |
| Brake power share | 33.882 % |
Open this example in the calculator and change any input.
Formula
\(\dot Q_f = \dot m_f\,CV\)
\(\dot Q_w = \dot m_w\,c_w\,\Delta T_w \qquad \dot Q_g = \dot m_g\,c_{p,g}\,(T_g - T_a)\)
\(\dot Q_u = \dot Q_f - BP - \dot Q_w - \dot Q_g \qquad x_b = BP / \dot Q_f\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_f\) | Fuel flow | kg/s |
| \(CV\) | Fuel calorific value, net (NCV) | J/kg |
| \(c_w\) | Cooling water specific heat, 4186.8 | J/(kg·K) |
| \(BP\) | Brake power | W |
| \(\dot m_w\) | Cooling water flow | kg/s |
| \(\Delta T_w\) | Cooling water temperature rise | K |
| \(\dot m_g\) | Exhaust gas flow | kg/s |
| \(c_{p,g}\) | Exhaust specific heat | J/(kg·K) |
| \(T_g\) | Exhaust temperature | K |
| \(T_a\) | Ambient (reference) temperature | K |
| \(\dot Q_f\) | Fuel heat | W |
| \(\dot Q_w\) | Heat to cooling water | W |
| \(\dot Q_g\) | Heat in the exhaust | W |
| \(\dot Q_u\) | Unaccounted (radiation and other) | W |
| \(x_b\) | Brake power share | - |
Method and standards
First law.
Where it is used
- DG set waste heat studies.
- Engine laboratories and examinations.
Common mistakes
- Exhaust flow guessed from fuel only.
- Gross vs net CV.
Assumptions and limits
- Steady test.
- Net calorific value: with a gross value the latent heat of the water vapour in the exhaust ends up in the unaccounted term.
- Exhaust heat measured above the ambient (reference) temperature.
References
- First-law heat balance on the engine
Questions and answers
What does the default test give?
Fuel 148 kW: brake 50, water 38, exhaust 53 and unaccounted 7 kW.
Waste heat recovery?
The exhaust and jacket water shares are the recoverable heat.
Unaccounted?
Radiation, lube oil cooling and measurement error.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.