Worked example
Example: Diesel at part load. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Air flow | 648.00 kg/h |
| Fuel flow | 22.000 kg/h |
| Stoichiometric air–fuel ratio | 14.500 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Air–fuel ratio | 29.455 |
| Lambda AFR/AFR_s | 2.0313 |
| Equivalence ratio 1/λ | 0.49228 |
| Excess air (λ − 1) | 103.13 % |
Open this example in the calculator and change any input.
Formula
\(AFR = \frac{\dot m_a}{\dot m_f}, \quad \lambda = \frac{AFR}{AFR_s}, \quad \phi = \frac{1}{\lambda}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_a\) | Air flow | kg/s |
| \(\dot m_f\) | Fuel flow | kg/s |
| \(AFR_s\) | Stoichiometric air–fuel ratio | - |
| \(AFR\) | Air–fuel ratio | - |
| \(\lambda\) | Lambda AFR/AFR_s | - |
| \(\phi\) | Equivalence ratio 1/λ | - |
| \(EA\) | Excess air (λ − 1) | - |
Method and standards
Definitions.
Where it is used
- Engine tuning and emissions.
- Burner and boiler analogies.
Common mistakes
- Volume instead of mass flows.
- Wrong stoichiometric ratio for the fuel.
Assumptions and limits
- Steady running.
- A negative excess air (λ < 1, rich) is the air deficiency; with no air flow φ is not shown.
References
- AFR = ṁ_a/ṁ_f; λ = AFR/AFR_s; φ = 1/λ
Questions and answers
0.18 kg/s of air with 22 kg/h of diesel?
AFR 29.5: λ 2.03.
Why do diesels run lean?
They control load by fuel alone, with excess air at part load.
Gas engines?
Lean-burn engines run near λ 1.8–2.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.