FireCADCalc

Engine Brake Thermal Efficiency and Specific Fuel Consumption

Brake thermal efficiency, brake specific fuel consumption and heat rate of an engine or DG set from brake power, fuel flow and calorific value.

Boiler operation engineer (BOE) examinations

Inputs

Examples: 50 kW DG setGas engine 1 MW

Results

Use net CV for engine efficiency, as engine makers do.

Brake thermal efficiency33.882%
Brake specific fuel consumption250.00g/kWh
Heat rate10,625kJ/kWh

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 kW DG set. The inputs, in the units selected above:

InputValue
Brake power50.000 kW
Fuel consumption12.500 kg/h
Fuel calorific value (net)42.500 MJ/kg

Applying the formula below gives:

ResultValue
Brake thermal efficiency33.882 %
Brake specific fuel consumption250.00 g/kWh
Heat rate10,625 kJ/kWh

Open this example in the calculator and change any input.

Formula

\(\eta_{bt} = \frac{BP}{\dot m_f CV}, \quad BSFC = \frac{\dot m_f}{BP}, \quad HR = \frac{1}{\eta_{bt}}\)

Variables

Symbol Meaning SI unit
\(BP\) Brake power W
\(\dot m_f\) Fuel consumption kg/s
\(CV\) Fuel calorific value (net) J/kg
\(\eta_{bt}\) Brake thermal efficiency -
\(BSFC\) Brake specific fuel consumption kg/J
\(HR\) Heat rate J/J

Method and standards

Definitions.

Where it is used

  • DG set performance checks.
  • Engine testing.

Common mistakes

  • Gross CV with engine data.
  • Volume instead of mass of fuel.

Assumptions and limits

  • Steady load.
  • An efficiency of 100 % or more is rejected; above 60 % is flagged as unlikely.

References

  • η_bt = BP/(ṁ_f CV); BSFC = ṁ_f/BP

Questions and answers

50 kW on 12.5 kg/h of diesel (42.5 MJ/kg)?

η 33.9 %, BSFC 250 g/kWh.

Litres instead of kg?

Multiply by density (about 0.83 kg/L for diesel).

Part load?

BSFC rises as load falls.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.