FireCADCalc

Blending Two Spirits to a Target Strength

Volumes of a strong and a weak spirit (or water) to make a blend of target strength and volume by the absolute-alcohol balance, ignoring contraction.

Distillery and ethanol

Inputs

Examples: RS to 42.8 % with waterTwo spirits

Results

Mixing contracts the volume by up to a few per cent: blend slightly long and adjust with a hydrometer reading.

Strong spirit178.57L
Weak spirit or water321.43L
Absolute alcohol in the blend300.00L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: RS to 42.8 % with water. The inputs, in the units selected above:

InputValue
Strong spirit strength (% vol at 20 °C)94.400 %
Weak spirit strength (% vol at 20 °C; 0 for water)0 %
Target strength (% vol at 20 °C)42.800 %
Blend volume wanted (at 20 °C)1,000.0 L

Applying the formula below gives:

ResultValue
Strong spirit453.39 L
Weak spirit or water546.61 L
Absolute alcohol in the blend428.00 L

Open this example in the calculator and change any input.

Formula

\(V_1 = V_t \frac{s_t - s_2}{s_1 - s_2}, \quad V_2 = V_t - V_1\)

Variables

Symbol Meaning SI unit
\(s_1\) Strong spirit strength (% vol at 20 °C) -
\(s_2\) Weak spirit strength (% vol at 20 °C; 0 for water) -
\(s_t\) Target strength (% vol at 20 °C) -
\(V_t\) Blend volume wanted (at 20 °C) m³
\(V_1\) Strong spirit m³
\(V_2\) Weak spirit or water m³
\(AL\) Absolute alcohol in the blend m³

Method and standards

Alcohol balance.

Where it is used

  • Potable spirit reduction.
  • Hand sanitiser and solvent blends.

Common mistakes

  • Ignoring contraction for exact excise volumes.

Assumptions and limits

  • No contraction: the blend comes out a few per cent short of V_t near 40–60 % vol and slightly above the target strength. The spirit blending with contraction calculator corrects for it.
  • Strengths and volumes at 20 °C.

References

  • Absolute alcohol balance V₁s₁ + V₂s₂ = V_t s_t (volume contraction neglected)

Questions and answers

Why is the blend short?

Ethanol–water mixing contracts the volume.

Exact blending?

Blend on mass with densities from the tables, then check the strength.

Two spirits of the same strength?

No blend can change the strength; choose different strengths.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.