Worked example
Example: 50 L + 50 L. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pure ethanol at 20 °C | 50.000 L |
| Water at 20 °C | 50.000 L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Volume of the mixture at 20 °C | 96.463 L |
| Contraction | 3.5373 % |
| Strength by mass | 44.155 % |
| Strength by volume at 20 °C | 51.834 % |
Open this example in the calculator and change any input.
Formula
\(p = \frac{V_e\rho_e}{V_e\rho_e + V_w\rho_w}, \quad V_m = \frac{V_e\rho_e + V_w\rho_w}{\rho_{20}(p)}, \quad q = \frac{V_e}{V_m}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_e\) | Pure ethanol at 20 °C | m³ |
| \(V_w\) | Water at 20 °C | m³ |
| \(V_m\) | Volume of the mixture at 20 °C | m³ |
| \(\Delta V/(V_e + V_w)\) | Contraction | - |
| \(p\) | Strength by mass | - |
| \(q\) | Strength by volume at 20 °C | - |
| \(\rho_e, \rho_w\) | Densities of ethanol and water at 20 °C (R 22) | kg/m³ |
Method and standards
Mass balance with R 22 densities at 20 °C.
Where it is used
- Reducing spirits to bottling strength.
- Teaching why % vol is not additive.
Common mistakes
- Adding volumes.
- Mixing at different temperatures.
Assumptions and limits
- Both liquids at 20 °C; after mixing, back to 20 °C.
References
- OIML R 22 (1973)
- Alcoholometry
- and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
- pp. 12–13
Questions and answers
Why does the mixture shrink?
Hydrogen bonding packs ethanol and water molecules more closely than in either pure liquid.
Where is contraction largest?
Near 55–60 % vol, about 3.5–3.6 % of the summed volumes.
Is mass conserved?
Yes, only volume shrinks; that is why % vol needs the density tables.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.