FireCADCalc

Torsional Natural Frequency of a Two-Rotor Shaft

Torsional natural frequency of two rotors on a shaft (e.g. motor and pump, engine and flywheel), with the node position, from rotor inertias and shaft stiffness.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Motor 5, load 15 kg·m², 60 mm × 1.2 mEngine and flywheel

Results

Coupling stiffness should be added in series with the shaft for real drive trains. Excitations at multiples of running speed (blade pass, firing order) also count.

Shaft torsional stiffness (torque per radian of twist)531,474N·m
Torsional natural frequency146.00Hz
Critical speed (1 per revolution)8,759.9rpm
Node distance from rotor A0.47368m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Motor 5, load 15 kg·m², 60 mm × 1.2 m. The inputs, in the units selected above:

InputValue
Inertia of rotor A5.0000 kg·m²
Inertia of rotor B15.000 kg·m²
Shaft diameter60.000 mm
Shaft length between rotors1.2000 m
Shear modulus79.300 GPa

Applying the formula below gives:

ResultValue
Shaft torsional stiffness (torque per radian of twist)84,081 N·m
Torsional natural frequency23.832 Hz
Critical speed (1 per revolution)1,429.9 rpm
Node distance from rotor A0.90000 m

Open this example in the calculator and change any input.

Formula

\(k_t = \frac{G\pi d^4}{32L}, \quad \omega_n = \sqrt{k_t\frac{I_A + I_B}{I_AI_B}}, \quad L_A = L\frac{I_B}{I_A + I_B}\)

Variables

Symbol Meaning SI unit
\(I_A\) Inertia of rotor A kg·m²
\(I_B\) Inertia of rotor B kg·m²
\(d\) Shaft diameter m
\(L\) Shaft length between rotors m
\(G\) Shear modulus Pa
\(k_t\) Shaft torsional stiffness (torque per radian of twist) N·m/rad
\(f_n\) Torsional natural frequency 1/s
\(N_c\) Critical speed (1 per revolution) 1/s
\(L_A\) Node distance from rotor A m

Method and standards

Two-rotor torsional model.

Where it is used

  • Motor–pump and engine–generator trains.
  • Coupling selection.

Common mistakes

  • Ignoring coupling flexibility.
  • Using polar inertia in kg·m² vs. GD².

Assumptions and limits

  • Massless uniform shaft.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (two-rotor torsional system)
  • Rao
  • Mechanical Vibrations
  • 6th ed. (Pearson, 2017)
  • ch. 6

Questions and answers

Where is the node?

The point on the shaft that does not twist; it lies closer to the heavier rotor.

Why does it matter?

Running at or near a torsional natural frequency (or an excitation order of it) can fatigue couplings and shafts quickly.

What do the defaults represent?

A motor (5 kg·m²) driving a load (15 kg·m²) through a 60 mm, 1.2 m shaft.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.