FireCADCalc

Simple and Compound Pendulum Period

Period of a simple pendulum from length, and of a compound pendulum from its moment of inertia about the pivot and the distance to its centre of gravity.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 1 m pendulum; 10 kg part, I_O 2Connecting rod 4 kg, I_O 0.15, h 0.18Measured period 1.6 s for the 10 kg part

Leave at 0 to check against the computed period.

Results

Small swings (below about 10°). Swinging a part as a compound pendulum is a practical way to measure its moment of inertia.

Simple pendulum period2.0064s
Compound pendulum period1.4187s
Equivalent simple length I_O/(mh)0.50000m
Inertia from the measured period (or from T_c when none is entered)2.5437kg·m²

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1 m pendulum; 10 kg part, I_O 2. The inputs, in the units selected above:

InputValue
Simple pendulum length1.0000 m
Moment of inertia about the pivot (compound)2.0000 kg·m²
Mass (compound)10.000 kg
Pivot to centre of gravity (compound)0.40000 m
Measured compound period (optional, for the inertia check)0 s
Local gravity9.8066 m/s²

Applying the formula below gives:

ResultValue
Simple pendulum period2.0064 s
Compound pendulum period1.4187 s
Equivalent simple length I_O/(mh)0.50000 m
Inertia from the measured period (or from T_c when none is entered)2.0000 kg·m²

Open this example in the calculator and change any input.

Formula

\(T_s = 2\pi\sqrt{\frac Lg}, \quad T_c = 2\pi\sqrt{\frac{I_O}{mgh}}, \quad L_e = \frac{I_O}{mh}, \quad I_{O,m} = \frac{T_m^2\,mgh}{4\pi^2}\)

Variables

Symbol Meaning SI unit
\(L\) Simple pendulum length m
\(I_O\) Moment of inertia about the pivot (compound) kg·m²
\(m\) Mass (compound) kg
\(h\) Pivot to centre of gravity (compound) m
\(g\) Local gravity m/s
\(T_s\) Simple pendulum period s
\(T_c\) Compound pendulum period s
\(L_e\) Equivalent simple length I_O/(mh) m
\(T_m\) Measured compound period (optional; 0 uses T_c) s
\(I_{O,m}\) Inertia from the measured period (or from T_c when none is entered) kg·m²

Method and standards

Small-angle pendulum.

Where it is used

  • Measuring rotor and connecting rod inertia.
  • Teaching.

Common mistakes

  • Using inertia about the centre of gravity instead of the pivot.
  • Large amplitudes.

Assumptions and limits

  • Small oscillations.

References

  • Rao
  • Mechanical Vibrations
  • 6th ed. (Pearson, 2017)
  • ch. 2
  • Meriam and Kraige
  • Engineering Mechanics: Dynamics
  • 8th ed. (Wiley, 2015)
  • ch. 6

Questions and answers

Why does mass not affect a simple pendulum?

Gravity force and inertia both scale with mass and cancel.

How do I measure a part's inertia?

Hang it from a pivot, time small swings, then I_O = T²mgh/(4π²).

What do the defaults represent?

A 1 m simple pendulum, and a 10 kg part with I_O = 2 kg·m² pivoted 0.4 m from its centre of gravity.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.