Worked example
Example: 1 m pendulum; 10 kg part, I_O 2. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Simple pendulum length | 1.0000 m |
| Moment of inertia about the pivot (compound) | 2.0000 kg·m² |
| Mass (compound) | 10.000 kg |
| Pivot to centre of gravity (compound) | 0.40000 m |
| Measured compound period (optional, for the inertia check) | 0 s |
| Local gravity | 9.8066 m/s² |
Applying the formula below gives:
| Result | Value |
|---|---|
| Simple pendulum period | 2.0064 s |
| Compound pendulum period | 1.4187 s |
| Equivalent simple length I_O/(mh) | 0.50000 m |
| Inertia from the measured period (or from T_c when none is entered) | 2.0000 kg·m² |
Open this example in the calculator and change any input.
Formula
\(T_s = 2\pi\sqrt{\frac Lg}, \quad T_c = 2\pi\sqrt{\frac{I_O}{mgh}}, \quad L_e = \frac{I_O}{mh}, \quad I_{O,m} = \frac{T_m^2\,mgh}{4\pi^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Simple pendulum length | m |
| \(I_O\) | Moment of inertia about the pivot (compound) | kg·m² |
| \(m\) | Mass (compound) | kg |
| \(h\) | Pivot to centre of gravity (compound) | m |
| \(g\) | Local gravity | m/s |
| \(T_s\) | Simple pendulum period | s |
| \(T_c\) | Compound pendulum period | s |
| \(L_e\) | Equivalent simple length I_O/(mh) | m |
| \(T_m\) | Measured compound period (optional; 0 uses T_c) | s |
| \(I_{O,m}\) | Inertia from the measured period (or from T_c when none is entered) | kg·m² |
Method and standards
Small-angle pendulum.
Where it is used
- Measuring rotor and connecting rod inertia.
- Teaching.
Common mistakes
- Using inertia about the centre of gravity instead of the pivot.
- Large amplitudes.
Assumptions and limits
- Small oscillations.
References
- Rao
- Mechanical Vibrations
- 6th ed. (Pearson, 2017)
- ch. 2
- Meriam and Kraige
- Engineering Mechanics: Dynamics
- 8th ed. (Wiley, 2015)
- ch. 6
Questions and answers
Why does mass not affect a simple pendulum?
Gravity force and inertia both scale with mass and cancel.
How do I measure a part's inertia?
Hang it from a pivot, time small swings, then I_O = T²mgh/(4π²).
What do the defaults represent?
A 1 m simple pendulum, and a 10 kg part with I_O = 2 kg·m² pivoted 0.4 m from its centre of gravity.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.