Worked example
Example: From rest, 2 m/s² for 5 s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Initial speed | 0 m/s |
| Acceleration (negative to brake) | 2.0000 m/s² |
| Time | 5.0000 s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Final speed u + a t | 10.000 m/s |
| Distance u t + ½ a t² | 25.000 m |
| Average speed | 5.0000 m/s |
Open this example in the calculator and change any input.
Formula
\(v = u + a t, \quad s = u t + \tfrac12 a t^2, \quad s_{stop} = \frac{u^2}{2|a|}\)
Variables
| Symbol | Meaning | SI unit | ||
|---|---|---|---|---|
| \(u\) | Initial speed | m/s | ||
| \(a\) | Acceleration, in m/s² (negative to brake) | m/s² | ||
| \(t\) | Time | s | ||
| \(v\) | Final speed u + a t | m/s | ||
| \(s\) | Distance u t + ½ a t² | m | ||
| \(\bar v\) | Average speed | m/s | ||
| \(s_{stop}\) | Distance to stop from u at the deceleration | a | m |
Method and standards
Integration of constant acceleration.
Where it is used
- Conveyors, cranes and vehicles.
- Mechanics examinations.
Common mistakes
- Mixing km/h and m/s.
- Sign of deceleration.
Assumptions and limits
- Constant acceleration. When braking, the body stops at t = u/|a| and stays at rest (no reversal); the stopping distance is shown only when the acceleration opposes the motion.
- Acceleration in m/s² in every unit system.
References
- Textbook mechanics (equations of motion for constant acceleration)
Questions and answers
From rest at 2 m/s² for 5 s?
10 m/s after 25 m.
Stopping from 20 m/s at 5 m/s²?
40 m.
Is it valid for changing acceleration?
No, only constant acceleration.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.