FireCADCalc

Linear Motion: Speed, Distance and Time (Uniform Acceleration)

Final speed, distance and average speed of a body moving with uniform acceleration from initial speed, acceleration and time, with stopping distance.

Inputs

Examples: From rest, 2 m/s² for 5 sBraking from 20 m/s at −5 m/s² for 3 sCruise 3 m/s, no acceleration, 10 sBraking from 20 m/s at −5 m/s² for 10 s (stops at 4 s)

Results

The body stops after 4 s and stays at rest (braking does not reverse it): speed and distance are for that.

Final speed u + a t0m/s
Distance u t + ½ a t²40.000m
Average speed4.0000m/s
Distance to stop from u at the deceleration |a|40.000m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: From rest, 2 m/s² for 5 s. The inputs, in the units selected above:

InputValue
Initial speed0 m/s
Acceleration (negative to brake)2.0000 m/s²
Time5.0000 s

Applying the formula below gives:

ResultValue
Final speed u + a t10.000 m/s
Distance u t + ½ a t²25.000 m
Average speed5.0000 m/s

Open this example in the calculator and change any input.

Formula

\(v = u + a t, \quad s = u t + \tfrac12 a t^2, \quad s_{stop} = \frac{u^2}{2|a|}\)

Variables

Symbol Meaning SI unit
\(u\) Initial speed m/s
\(a\) Acceleration, in m/s² (negative to brake) m/s²
\(t\) Time s
\(v\) Final speed u + a t m/s
\(s\) Distance u t + ½ a t² m
\(\bar v\) Average speed m/s
\(s_{stop}\) Distance to stop from u at the deceleration a m

Method and standards

Integration of constant acceleration.

Where it is used

  • Conveyors, cranes and vehicles.
  • Mechanics examinations.

Common mistakes

  • Mixing km/h and m/s.
  • Sign of deceleration.

Assumptions and limits

  • Constant acceleration. When braking, the body stops at t = u/|a| and stays at rest (no reversal); the stopping distance is shown only when the acceleration opposes the motion.
  • Acceleration in m/s² in every unit system.

References

  • Textbook mechanics (equations of motion for constant acceleration)

Questions and answers

From rest at 2 m/s² for 5 s?

10 m/s after 25 m.

Stopping from 20 m/s at 5 m/s²?

40 m.

Is it valid for changing acceleration?

No, only constant acceleration.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.