FireCADCalc

Lever: Effort, Mechanical Advantage and Fulcrum Reaction

Effort needed on a lever of the first, second or third class from the load and the arm lengths, the mechanical advantage and the force on the fulcrum.

Inputs

Examples: 1 kN at 0.2 m, effort at 1 m, first classWheelbarrow 600 N at 0.4 m, handles 1.3 m (second class)Tongs 20 N at 0.25 m, effort at 0.1 m (third class)

Results

Effort W a/b0.18462kN
Mechanical advantage b/a3.2500
Force on the fulcrum0.41538kN

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1 kN at 0.2 m, effort at 1 m, first class. The inputs, in the units selected above:

InputValue
Load1.0000 kN
Load arm (fulcrum to load)0.20000 m
Effort arm (fulcrum to effort)1.0000 m
Lever classFirst class (fulcrum between)

Applying the formula below gives:

ResultValue
Effort W a/b0.20000 kN
Mechanical advantage b/a5.0000
Force on the fulcrum1.2000 kN

Open this example in the calculator and change any input.

Formula

\(P = W\, \frac{a}{b}, \quad MA = \frac{b}{a}\)

Variables

Symbol Meaning SI unit
\(W\) Load N
\(a\) Load arm (fulcrum to load) m
\(b\) Effort arm (fulcrum to effort) m
\(\text{class}\) Lever class -
\(P\) Effort W a/b N
\(MA\) Mechanical advantage b/a -
\(R\) Force on the fulcrum N

Method and standards

Moments about the fulcrum.

Where it is used

  • Valves, brakes and hand tools.
  • Mechanics examinations.

Common mistakes

  • Measuring arms not perpendicular to the forces.
  • Ignoring the lever's own weight.

Assumptions and limits

  • Weightless, rigid lever.

References

  • Textbook mechanics (principle of moments)

Questions and answers

1000 N at 0.2 m, effort at 1 m (first class)?

200 N of effort, mechanical advantage 5, fulcrum force 1200 N.

What is a third-class lever?

Effort between fulcrum and load: it trades force for movement, MA below 1.

Why does the fulcrum force differ?

In the first class both forces push the same way on the fulcrum.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.