FireCADCalc

Zinc Coating: Thickness ↔ Mass per Area and Life

Convert a zinc (or other metal) coating between thickness and mass per square metre, with the zinc on a part and the life at a given corrosion rate.

Thermal power plantRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 85 µm, 2 µm a year610 g/m2 given

g/m²
Zinc about 7140 kg/m³.
From your atmosphere's corrosivity data.

Results

Thickness85.434µm
Mass per area610.00g/m²
Coating on the part7.3200kg
Life to first maintenance21.359a

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 85 µm, 2 µm a year. The inputs, in the units selected above:

InputValue
Value givenThickness
Coating thickness85.000 µm
Coating mass per area (one side)610.00 -
Coating density7,140.0 kg/m³
Coated area12.000 m²
Coating corrosion rate in service2.0000 µm/a

Applying the formula below gives:

ResultValue
Thickness85.000 µm
Mass per area606.90 g/m²
Coating on the part7.2828 kg
Life to first maintenance42.500 a

Open this example in the calculator and change any input.

Formula

\(m'' = \delta\rho, \quad t_L = \frac{\delta}{CR}\)

Variables

Symbol Meaning SI unit
\(\text{given}\) Value given -
\(\delta\) Coating thickness m
\(m''\) Coating mass per area (one side) -
\(\rho\) Coating density kg/m³
\(A\) Coated area m²
\(CR\) Coating corrosion rate in service m/s
\(m\) Coating on the part kg
\(t_L\) Life to first maintenance s

Method and standards

Definitions.

Where it is used

  • Structural steel and cable trays.
  • Specifying galvanising.

Common mistakes

  • Total vs per-side mass.
  • Ignoring local corrosivity.

Assumptions and limits

  • Uniform coating and corrosion. With a zero corrosion rate the life is not shown.
  • The mass per area input is in g/m² as a plain number; the output mass per area can be shown in other units.

References

  • Mass per area = thickness × density; life = thickness/corrosion rate

Questions and answers

85 µm of zinc?

About 607 g/m².

Life at 2 µm a year?

About 42 years before the zinc is gone in that atmosphere.

Both sides of sheet?

Sheet coating weights often quote the total for both sides; halve it per side.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.