FireCADCalc

Decibel Calculator: Power, Voltage and Current Ratios

Gain or loss in decibels from power or voltage ratios and back, with dBm and dBV levels, for signals, amplifiers, filters and cable losses.

Thermal power plantProcess steam and utilities

Inputs

Examples: Half voltage; −6 dB to ratiosPower 100 W to 2 W; +20 dBVoltage gain 0.1 V to 5 V; −3 dB

Results

Voltage ratios use 20 log only when both voltages are across the same impedance.

Gain in dB-16.990
Power ratio for the dB entered100.00
Voltage ratio for the dB entered10.000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Half voltage; −6 dB to ratios. The inputs, in the units selected above:

InputValue
Reference value (power or voltage)1.0000 -
Measured value0.50000 -
The values areVoltages or currents (20 log)
Gain to convert to a ratio (dB)-6.0000 -

Applying the formula below gives:

ResultValue
Gain in dB-6.0206
Power ratio for the dB entered0.25119
Voltage ratio for the dB entered0.50119

Open this example in the calculator and change any input.

Formula

\(G = 10\log_{10}\frac{P_2}{P_1} = 20\log_{10}\frac{V_2}{V_1}\)

Variables

Symbol Meaning SI unit
\(X_1\) Reference value (power or voltage) -
\(X_2\) Measured value -
\(\text{kind}\) The values are -
\(G\) Gain to convert to a ratio (dB) -
\(G_{12}\) Gain in dB -
\(P_2/P_1\) Power ratio for the dB entered -
\(V_2/V_1\) Voltage ratio for the dB entered -

Method and standards

Definition of the decibel.

Where it is used

  • Signal and filter specifications.
  • Cable and coupling losses.

Common mistakes

  • Using 20 log for powers.
  • Ratios across different impedances.

Assumptions and limits

  • Equal impedances for voltage ratios.

References

  • Definition of the decibel (IEC 60027-3)

Questions and answers

What is half the voltage in dB?

−6.02 dB; half the power is −3.01 dB.

What is −20 dB?

A tenth of the voltage, a hundredth of the power.

Why 20 log for voltage?

Power goes with voltage squared.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.