Worked example
Example: Half voltage; −6 dB to ratios. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Reference value (power or voltage) | 1.0000 - |
| Measured value | 0.50000 - |
| The values are | Voltages or currents (20 log) |
| Gain to convert to a ratio (dB) | -6.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Gain in dB | -6.0206 |
| Power ratio for the dB entered | 0.25119 |
| Voltage ratio for the dB entered | 0.50119 |
Open this example in the calculator and change any input.
Formula
\(G = 10\log_{10}\frac{P_2}{P_1} = 20\log_{10}\frac{V_2}{V_1}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(X_1\) | Reference value (power or voltage) | - |
| \(X_2\) | Measured value | - |
| \(\text{kind}\) | The values are | - |
| \(G\) | Gain to convert to a ratio (dB) | - |
| \(G_{12}\) | Gain in dB | - |
| \(P_2/P_1\) | Power ratio for the dB entered | - |
| \(V_2/V_1\) | Voltage ratio for the dB entered | - |
Method and standards
Definition of the decibel.
Where it is used
- Signal and filter specifications.
- Cable and coupling losses.
Common mistakes
- Using 20 log for powers.
- Ratios across different impedances.
Assumptions and limits
- Equal impedances for voltage ratios.
References
- Definition of the decibel (IEC 60027-3)
Questions and answers
What is half the voltage in dB?
−6.02 dB; half the power is −3.01 dB.
What is −20 dB?
A tenth of the voltage, a hundredth of the power.
Why 20 log for voltage?
Power goes with voltage squared.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.