FireCADCalc

ADC and DAC Resolution, LSB and Ideal SNR

Smallest step (LSB) of an analogue-to-digital converter in volts and in engineering units, the counts for a value, and the ideal quantisation SNR and ENOB.

Thermal power plantProcess steam and utilities

Inputs

Examples: 12 bit, 10 V, 200 °C span, 3.3 V in, SINAD 68 dB16 bit, 5 V, 16 bar, 1.234 V, 90 dB10 bit, 3.3 V, 100 %, 3.3 V (full scale), 58 dB

For example 200 °C or 16 bar; the LSB is shown in the same unit.

Results

LSB in volts V_FS / 2ᴺ3.2227mV
LSB in engineering units0.097656
Counts for the input voltage (rounded down)1,023.0
Ideal quantisation SNR 6.02 N + 1.76 (dB)61.960
Effective number of bits for the SINAD9.3422

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 12 bit, 10 V, 200 °C span, 3.3 V in, SINAD 68 dB. The inputs, in the units selected above:

InputValue
Resolution in bits12.000 -
Full-scale input range10.000 V
Engineering span represented by full scale200.00 -
Input voltage to convert to counts3.3000 V
Measured SINAD for ENOB (dB)68.000 -

Applying the formula below gives:

ResultValue
LSB in volts V_FS / 2ᴺ2.4414 mV
LSB in engineering units0.048828
Counts for the input voltage (rounded down)1,351.0
Ideal quantisation SNR 6.02 N + 1.76 (dB)74.000
Effective number of bits for the SINAD11.003

Open this example in the calculator and change any input.

Formula

\(q = \frac{V_{FS}}{2^N}, \quad SNR = 6.02N + 1.76\ \text{dB}, \quad ENOB = \frac{SINAD - 1.76}{6.02}\)

Variables

Symbol Meaning SI unit
\(N\) Resolution in bits -
\(V_{FS}\) Full-scale input range V
\(S\) Engineering span represented by full scale -
\(V\) Input voltage to convert to counts V
\(SINAD\) Measured SINAD for ENOB (dB) -
\(q\) LSB in volts V_FS / 2ᴺ V
\(q_{EU}\) LSB in engineering units -
\(n\) Counts for the input voltage (rounded down) -
\(SNR\) Ideal quantisation SNR 6.02 N + 1.76 (dB) -
\(ENOB\) Effective number of bits for the SINAD -

Method and standards

Uniform quantisation.

Where it is used

  • PLC and DCS input resolution checks.
  • Data acquisition design.

Common mistakes

  • Counting the sign bit for unipolar ranges.
  • Expecting the ideal SNR in practice.

Assumptions and limits

  • Uniform, unipolar converter.

References

  • Ideal quantisation of an N-bit converter; SNR = 6.02 N + 1.76 dB for a full-scale sine (IEEE 1241)

Questions and answers

What is the step of a 12-bit, 10 V converter?

2.44 mV; over a 200 °C span, 0.049 °C.

What SNR can 12 bits give?

74 dB in theory.

What is ENOB?

The bits a real converter delivers: (SINAD − 1.76)/6.02; 68 dB is 11 bits.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.