FireCADCalc

Triangle Calculator from Three Sides (Angles, Area)

Angles, area (Heron's formula), perimeter, and the circumscribed and inscribed circle radii of a triangle from its three sides, by the cosine rule.

Inputs

Examples: 3-4-5 right triangleEquilateral 2 mObtuse 5, 7, 10

Results

Angle opposite a60.000°
Angle opposite b60.000°
Angle opposite c60.000°
Area1.7321m²
Perimeter6.0000m
Circumscribed circle radius1.1547m
Inscribed circle radius0.57735m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 3-4-5 right triangle. The inputs, in the units selected above:

InputValue
Side a3.0000 m
Side b4.0000 m
Side c5.0000 m

Applying the formula below gives:

ResultValue
Angle opposite a36.870 °
Angle opposite b53.130 °
Angle opposite c90.000 °
Area6.0000 m²
Perimeter12.000 m
Circumscribed circle radius2.5000 m
Inscribed circle radius1.0000 m

Open this example in the calculator and change any input.

Formula

\(A = \arccos\frac{b^2 + c^2 - a^2}{2bc}\)

\(S = \sqrt{s(s-a)(s-b)(s-c)}, \quad s = \frac{a+b+c}{2}\)

\(R = \frac{abc}{4S}, \quad r = \frac{S}{s}\)

Variables

Symbol Meaning SI unit
\(a\) Side a m
\(b\) Side b m
\(c\) Side c m
\(A\) Angle opposite a rad
\(B\) Angle opposite b rad
\(C\) Angle opposite c rad
\(S\) Area m²
\(P\) Perimeter m
\(R\) Circumscribed circle radius m
\(r\) Inscribed circle radius m

Method and standards

Cosine rule and Heron's formula.

Where it is used

  • Setting out and surveying.
  • Bracing and frame geometry.
  • Sheet metal layout.

Common mistakes

  • Mixing degrees and radians.
  • Sides that cannot close.

Assumptions and limits

  • Plane triangle.

References

  • Cosine rule; Heron's formula

Questions and answers

What are the angles of a 3-4-5 triangle?

36.87°, 53.13° and 90°; area 6, circumradius 2.5, inradius 1.

Which sides make a triangle?

Each side must be shorter than the sum of the other two.

An equilateral triangle of side 2?

All angles 60°, area 1.732.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.