Worked example
Example: 0.0045678 to 3 s.f.. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number | 0.004568 - |
| Significant figures | 3.0000 - |
| Decimal places | 2.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Rounded to significant figures | 0.004570 |
| Rounded to decimal places | 0 |
| Mantissa (1 ≤ |m| < 10) | 4.5678 |
| Exponent of ten | -3.0000 |
Open this example in the calculator and change any input.
Formula
\(x = m \times 10^e, \quad 1 \le |m| < 10\)
Variables
| Symbol | Meaning | SI unit | ||
|---|---|---|---|---|
| \(x\) | Number | - | ||
| \(n_s\) | Significant figures | - | ||
| \(n_d\) | Decimal places | - | ||
| \(x_s\) | Rounded to significant figures | - | ||
| \(x_d\) | Rounded to decimal places | - | ||
| \(m\) | Mantissa (1 ≤ | m | < 10) | - |
| \(e\) | Exponent of ten | - |
Method and standards
Definitions.
Where it is used
- Reporting test results.
- Examinations.
Common mistakes
- Leading zeros counted as significant.
- Rounding twice.
Assumptions and limits
- Decimal arithmetic between about 10⁻²⁰ and 10²⁷; outside that range the rounding is done in binary floating point and the page says so.
References
- Decimal rounding
- half away from zero
Questions and answers
0.0045678 to three significant figures?
0.00457, or 4.5678 × 10⁻³ in scientific notation.
Why significant figures?
Results should not claim more precision than the measurements.
Half to even?
Some software rounds halves to even; this page rounds them away from zero.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.