Worked example
Example: 3 + 4j and 1 − 2j. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Real part of z₁ | 3.0000 - |
| Imaginary part of z₁ | 4.0000 - |
| Real part of z₂ | 1.0000 - |
| Imaginary part of z₂ | -2.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Modulus of z₁ | 5.0000 |
| Argument of z₁ | 53.130 ° |
| Modulus of z₂ | 2.2361 |
| Argument of z₂ | -63.435 ° |
| Sum, real | 4.0000 |
| Sum, imaginary | 2.0000 |
| Difference, real | 2.0000 |
| Difference, imaginary | 6.0000 |
| Product, real | 11.000 |
| Product, imaginary | -2.0000 |
| Quotient, real | -1.0000 |
| Quotient, imaginary | 2.0000 |
Open this example in the calculator and change any input.
Formula
\(|z| = \sqrt{a^2 + b^2}, \quad \arg z = \operatorname{atan2}(b, a), \quad \frac{z_1}{z_2} = \frac{z_1\bar z_2}{|z_2|^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(a_1\) | Real part of z₁ | - |
| \(b_1\) | Imaginary part of z₁ | - |
| \(a_2\) | Real part of z₂ | - |
| \(b_2\) | Imaginary part of z₂ | - |
| \(|z_1|\) | Modulus of z₁ | - |
| \(\arg z_1\) | Argument of z₁ | rad |
| \(|z_2|\) | Modulus of z₂ | - |
| \(\arg z_2\) | Argument of z₂ | rad |
| \(\Re(z_1 + z_2)\) | Sum, real | - |
| \(\Im(z_1 + z_2)\) | Sum, imaginary | - |
| \(\Re(z_1 - z_2)\) | Difference, real | - |
| \(\Im(z_1 - z_2)\) | Difference, imaginary | - |
| \(\Re(z_1z_2)\) | Product, real | - |
| \(\Im(z_1z_2)\) | Product, imaginary | - |
| \(\Re(z_1/z_2)\) | Quotient, real | - |
| \(\Im(z_1/z_2)\) | Quotient, imaginary | - |
Method and standards
Complex arithmetic.
Where it is used
- A.c. circuit and phasor problems.
- Exam problems.
Common mistakes
- Wrong quadrant for the argument.
- Forgetting j² = −1.
Assumptions and limits
- Exact arithmetic.
- When z₂ is zero the quotient is not shown; the other results still are.
References
- Complex arithmetic (Kreyszig, Advanced Engineering Mathematics, 10th ed. (Wiley), ch. 13)
Questions and answers
Where are complex numbers used in engineering?
A.c. circuits (impedance, phasors), vibrations and control systems.
How is division done?
Multiply top and bottom by the conjugate of the divisor: (a + jb)/(c + jd) = (a + jb)(c − jd)/(c² + d²).
What do the defaults represent?
z₁ = 3 + 4j and z₂ = 1 − 2j.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.