Worked example
Example: Half circle: R 1 m, h 1 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Radius | 1.0000 m |
| Segment height (sagitta) | 1.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Central angle | 180.00 ° |
| Chord length | 2.0000 m |
| Arc length | 3.1416 m |
| Segment area | 1.5708 m² |
| Share of the full circle | 50.000 % |
Open this example in the calculator and change any input.
Formula
\(\theta = 2 \arccos\frac{R - h}{R}, \quad A = \frac{R^2}{2}(\theta - \sin\theta)\)
\(c = 2\sqrt{h(2R - h)}, \quad s = R\,\theta\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R\) | Radius | m |
| \(h\) | Segment height (sagitta) | m |
| \(\theta\) | Central angle | rad |
| \(c\) | Chord length | m |
| \(s\) | Arc length | m |
| \(A\) | Segment area | m² |
| \(A/(\pi R^2)\) | Share of the full circle | - |
Method and standards
Plane geometry of the circle.
Where it is used
- Partly full pipes, drains and horizontal tanks.
- Arches and bends.
- Cutting plates.
Common mistakes
- Using diameter for radius.
- Angle in degrees in sin θ.
Assumptions and limits
- Height from 0 to the diameter.
References
- Circle geometry
Questions and answers
What area is filled in a 1 m diameter pipe to a quarter of its depth?
R 0.5 m, h 0.25 m: area 0.154 m², 19.6 % of the circle, chord 0.866 m.
What is the sagitta?
The height of the segment, from the chord to the arc.
Half full?
Exactly half the area, θ = 180°.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.