Worked example
Example: Rectangle 3 x 4. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Shape | Rectangle (a × b) |
| Dimension a | 3.0000 m |
| Dimension b | 4.0000 m |
| Dimension c | 5.0000 m |
| Sector angle | 57.296 ° |
Applying the formula below gives:
| Result | Value |
|---|---|
| Area | 12.000 m² |
| Perimeter | 14.000 m |
Open this example in the calculator and change any input.
Formula
\(A_{rect} = ab,\ P = 2(a + b); \quad A_{circle} = \frac{\pi a^2}{4},\ P = \pi a\ (a = \text{diameter}); \quad A_{trap} = \frac{a + b}{2}c,\ P = a + b + 2\sqrt{c^2 + \left(\frac{a - b}{2}\right)^2}\)
\(A_{sector} = \frac{a^2\theta}{2},\ P = 2a + a\theta\ (a = \text{radius}); \quad A_{annulus} = \frac{\pi(a^2 - b^2)}{4},\ P = \pi(a + b)\ (a, b = \text{diameters}); \quad A_{ellipse} = \pi ab\)
\(A_\triangle = \sqrt{s(s - a)(s - b)(s - c)}, \quad P_{ellipse} \approx \pi(a + b)\left(1 + \frac{3h}{10 + \sqrt{4 - 3h}}\right), \ h = \frac{(a - b)^2}{(a + b)^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{shape}\) | Shape | - |
| \(a\) | Dimension a | m |
| \(b\) | Dimension b | m |
| \(c\) | Dimension c | m |
| \(\theta\) | Sector angle | rad |
| \(A\) | Area | m² |
| \(P\) | Perimeter | m |
Method and standards
Plane geometry.
Where it is used
- Plate, gasket and cut-out areas.
- Examinations.
Common mistakes
- Diameter vs radius.
- Degrees in sector formulas.
Assumptions and limits
- Plane figures.
References
- Plane geometry; Heron's formula; Ramanujan (1914) ellipse perimeter approximation
Questions and answers
Triangle 3, 4, 5?
Area 6, perimeter 12.
Ellipse 3 by 2?
Area 18.850, perimeter about 15.865.
Sector of 60° and radius 3?
Area 4.712.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.