FireCADCalc

Primary Consolidation Settlement of a Clay Layer

Primary consolidation settlement of a clay layer from compression index, initial void ratio, thickness and the stress increase, normally or over-consolidated.

Inputs

Examples: Normally consolidatedOver-consolidated, stays below sigma_cOver-consolidated, passes sigma_c

Equal to the initial stress for a normally consolidated clay.

Results

Consolidation settlement9.2202mm
Over-consolidation ratio1.8750

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Normally consolidated. The inputs, in the units selected above:

InputValue
Layer thickness4.0000 m
Initial void ratio0.90000 -
Compression index0.30000 -
Recompression (swelling) index0.050000 -
Initial effective stress at mid-layer60.000 kPa
Stress increase at mid-layer50.000 kPa
Preconsolidation stress60.000 kPa

Applying the formula below gives:

ResultValue
Consolidation settlement166.26 mm
Over-consolidation ratio1.0000

Open this example in the calculator and change any input.

Formula

\(S_c = \frac{H}{1 + e_0}\left[C_r\log\frac{\sigma'_c}{\sigma'_0} + C_c\log\frac{\sigma'_0 + \Delta\sigma}{\sigma'_c}\right]\ \ (\sigma'_0 + \Delta\sigma > \sigma'_c), \quad S_c = \frac{H}{1 + e_0}C_r\log\frac{\sigma'_0 + \Delta\sigma}{\sigma'_0}\ \ (\text{otherwise})\)

Variables

Symbol Meaning SI unit
\(H\) Layer thickness m
\(e_0\) Initial void ratio -
\(C_c\) Compression index -
\(C_r\) Recompression (swelling) index -
\(\sigma'_0\) Initial effective stress at mid-layer Pa
\(\Delta\sigma\) Stress increase at mid-layer Pa
\(\sigma'_c\) Preconsolidation stress Pa
\(S_c\) Consolidation settlement m
\(OCR\) Over-consolidation ratio -

Method and standards

One-dimensional consolidation.

Where it is used

  • Foundation settlement on clay.
  • Embankment and tank settlement.

Common mistakes

  • Total instead of effective stress.
  • One thick layer without subdivision.

Assumptions and limits

  • Primary consolidation only; stresses at mid-layer.

References

  • One-dimensional consolidation settlement with C_c and C_r (Terzaghi; Das, Principles of Geotechnical Engineering)

Questions and answers

4 m of clay, e0 0.9, Cc 0.3, 60 → 110 kPa, normally consolidated?

166 mm.

Thick layers?

Split into sub-layers and add their settlements.

How long will it take?

Use the consolidation time calculator.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.