FireCADCalc

Formwork (Shuttering) Area for Columns, Beams and Slabs

Shuttering area of rectangular columns, beams and slab soffits from their sizes and numbers, for estimating formwork and labour.

Inputs

Examples: Small framePump house

Columns

Beams

Slab

Results

Columns (four sides)54.000m²
Beams (soffit and two sides)80.100m²
Slab soffit and edges168.40m²
Total formwork area302.50m²

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Small frame. The inputs, in the units selected above:

InputValue
Column width0.30000 m
Column depth0.45000 m
Column height3.0000 m
Number of columns12.000 -
Beam width (soffit)0.23000 m
Beam depth below the slab (sides)0.33000 m
Total beam length (clear spans)90.000 m
Slab soffit area (less beam soffits)160.00 m²
Slab edge length56.000 m
Slab thickness0.15000 m

Applying the formula below gives:

ResultValue
Columns (four sides)54.000 m²
Beams (soffit and two sides)80.100 m²
Slab soffit and edges168.40 m²
Total formwork area302.50 m²

Open this example in the calculator and change any input.

Formula

\(A_c = 2(b_c + d_c) h_c n_c, \quad A_b = (b_b + 2 d_b) L_b, \quad A_{sl} = A_s + P_s t_s\)

Variables

Symbol Meaning SI unit
\(b_c\) Column width m
\(d_c\) Column depth m
\(h_c\) Column height m
\(n_c\) Number of columns -
\(b_b\) Beam width (soffit) m
\(d_b\) Beam depth below the slab (sides) m
\(L_b\) Total beam length (clear spans) m
\(A_s\) Slab soffit area (less beam soffits) m²
\(P_s\) Slab edge length m
\(t_s\) Slab thickness m
\(A_c\) Columns (four sides) m²
\(A_b\) Beams (soffit and two sides) m²
\(A_{sl}\) Slab soffit and edges m²
\(A\) Total formwork area m²

Method and standards

Contact areas.

Where it is used

  • Formwork hire and labour estimates.
  • Bills of quantities.

Common mistakes

  • Counting beam sides within the slab.
  • Using centre-line spans.

Assumptions and limits

  • Rectangular members.

References

  • Contact area of formwork (Common site practice (quantity estimating))

Questions and answers

Twelve 300 × 450 columns, 3 m high?

54 m² of column formwork.

Beams?

Soffit plus two sides below the slab, over the clear spans.

Is footing formwork included?

Add footing sides separately if they are shuttered.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.