FireCADCalc

Boiling Point Elevation of a Solution (Ebullioscopic)

Rise in boiling point of water when a non-volatile solute dissolves, from the molality and van 't Hoff factor, with the ebullioscopic constant from IF97 at the pressure.

Refinery and petrochemicalChemical and fertiliserFood, dairy and textileIAPWS-IF97 (water and steam)

Inputs

Examples: Salt water, 50 g NaCl per kg, 1 atmSugar 100 g per kg (non-ionic), 1 atmEvaporator at 0.3 bar(a), 30 g Na2SO4 per kg

Default: sodium chloride.

Results

Ideal dilute-solution law: good to about 1 mol/kg. Concentrated liquors (black liquor, sugar syrup, caustic) rise more; use a Dühring chart for them.

Molality of the solute0.29214mol/kg
Boiling point of pure water at the pressure99.974°C
Ebullioscopic constant R T_b² / h_fg (K·kg/mol)0.51298
Boiling point elevation i K_b b0.14986K
Boiling point of the solution100.12°C

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Salt water, 50 g NaCl per kg, 1 atm. The inputs, in the units selected above:

InputValue
Pressure (absolute)1.0132 bar
Solute per kg of water0.050000 kg/kg
Molar mass of the solute58.440 kg/kmol
van 't Hoff factor (ions or particles per formula unit)2.0000 -

Applying the formula below gives:

ResultValue
Molality of the solute0.85558 mol/kg
Boiling point of pure water at the pressure99.974 °C
Ebullioscopic constant R T_b² / h_fg (K·kg/mol)0.51298
Boiling point elevation i K_b b0.87778 K
Boiling point of the solution100.85 °C

Open this example in the calculator and change any input.

Formula

\(b = \frac{w}{M_s}, \quad K_b = \frac{R\, T_b^2}{h_{fg}}\)

\(\Delta T_b = i\, K_b\, b\)

Variables

Symbol Meaning SI unit
\(p\) Pressure (absolute) Pa
\(w\) Solute per kg of water kg/kg
\(M_s\) Molar mass of the solute kg/kmol
\(i\) van 't Hoff factor (ions or particles per formula unit) -
\(b\) Molality of the solute mol/kg
\(T_b\) Boiling point of pure water at the pressure K
\(K_b\) Ebullioscopic constant R T_b² / h_fg (K·kg/mol) -
\(\Delta T_b\) Boiling point elevation i K_b b K
\(T\) Boiling point of the solution K

Method and standards

Dilute-solution limit of Raoult's law combined with the Clausius–Clapeyron equation; T_b and h_fg of water from IF97.

Where it is used

  • Evaporator design.
  • Brine and salt solutions.
  • Chemistry examinations.

Common mistakes

  • Using molarity instead of molality.
  • Forgetting the van 't Hoff factor.
  • Applying to concentrated liquors.

Assumptions and limits

  • Dilute ideal solution, non-volatile solute.

References

  • Ideal dilute solution (Raoult and Clausius–Clapeyron)
  • IAPWS-IF97 (water and steam)

Questions and answers

How much does 50 g of salt per kg of water raise the boiling point?

Molality 0.856, van 't Hoff factor 2: ΔT = 2 × 0.513 × 0.856 = 0.88 K.

Where does 0.513 come from?

K_b = R T_b² / h_fg: 8.314 × 373.12² / 2 256 400 = 0.513 K·kg/mol at 1 atm.

Why does it matter in evaporators?

The boiling point rise reduces the temperature difference available, and must be added to the vapour temperature.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.