FireCADCalc

IC Engine Heat Balance Sheet

Heat balance of an engine per unit time: fuel heat, brake power, heat to cooling water, heat in the exhaust and the unaccounted remainder, with each share.

Boiler operation engineer (BOE) examinations

Inputs

Examples: Default testLarger set

Results

Cooling water specific heat 4.1868 kJ/(kg·K). Fuel heat on net calorific value: with a gross value the exhaust latent heat falls into the unaccounted term.

Fuel heat711.67kW
Heat to cooling water125.60kW
Heat in the exhaust228.69kW
Unaccounted (radiation and other)107.37kW
Brake power share35.129%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Default test. The inputs, in the units selected above:

InputValue
Fuel flow12.500 kg/h
Fuel calorific value (net, NCV)42.500 MJ/kg
Brake power50.000 kW
Cooling water flow1,800.0 kg/h
Cooling water temperature rise18.000 K
Exhaust gas flow432.00 kg/h
Exhaust specific heat1.0500 kJ/(kg·K)
Exhaust temperature450.00 °C
Ambient (reference) temperature30.000 °C

Applying the formula below gives:

ResultValue
Fuel heat147.57 kW
Heat to cooling water37.681 kW
Heat in the exhaust52.920 kW
Unaccounted (radiation and other)6.9682 kW
Brake power share33.882 %

Open this example in the calculator and change any input.

Formula

\(\dot Q_f = \dot m_f\,CV\)

\(\dot Q_w = \dot m_w\,c_w\,\Delta T_w \qquad \dot Q_g = \dot m_g\,c_{p,g}\,(T_g - T_a)\)

\(\dot Q_u = \dot Q_f - BP - \dot Q_w - \dot Q_g \qquad x_b = BP / \dot Q_f\)

Variables

Symbol Meaning SI unit
\(\dot m_f\) Fuel flow kg/s
\(CV\) Fuel calorific value, net (NCV) J/kg
\(c_w\) Cooling water specific heat, 4186.8 J/(kg·K)
\(BP\) Brake power W
\(\dot m_w\) Cooling water flow kg/s
\(\Delta T_w\) Cooling water temperature rise K
\(\dot m_g\) Exhaust gas flow kg/s
\(c_{p,g}\) Exhaust specific heat J/(kg·K)
\(T_g\) Exhaust temperature K
\(T_a\) Ambient (reference) temperature K
\(\dot Q_f\) Fuel heat W
\(\dot Q_w\) Heat to cooling water W
\(\dot Q_g\) Heat in the exhaust W
\(\dot Q_u\) Unaccounted (radiation and other) W
\(x_b\) Brake power share -

Method and standards

First law.

Where it is used

  • DG set waste heat studies.
  • Engine laboratories and examinations.

Common mistakes

  • Exhaust flow guessed from fuel only.
  • Gross vs net CV.

Assumptions and limits

  • Steady test.
  • Net calorific value: with a gross value the latent heat of the water vapour in the exhaust ends up in the unaccounted term.
  • Exhaust heat measured above the ambient (reference) temperature.

References

  • First-law heat balance on the engine

Questions and answers

What does the default test give?

Fuel 148 kW: brake 50, water 38, exhaust 53 and unaccounted 7 kW.

Waste heat recovery?

The exhaust and jacket water shares are the recoverable heat.

Unaccounted?

Radiation, lube oil cooling and measurement error.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.