Worked example
Example: Six-cylinder diesel. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Bore | 105.00 mm |
| Stroke | 120.00 mm |
| Number of cylinders | 6.0000 - |
| Speed | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Swept volume per cylinder | 1.0391 L |
| Total displacement | 6.2345 L |
| Mean piston speed 2SN | 6.0000 m/s |
Open this example in the calculator and change any input.
Formula
\(V_{s,1} = \frac{\pi B^2}{4}S, \quad V_s = V_{s,1} z, \quad \bar c_m = 2SN\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(B\) | Bore | m |
| \(S\) | Stroke | m |
| \(z\) | Number of cylinders | - |
| \(N\) | Speed | 1/s |
| \(V_{s,1}\) | Swept volume per cylinder (not the clearance volume V_c) | m³ |
| \(V_s\) | Total displacement | m³ |
| \(\bar c_m\) | Mean piston speed 2SN | m/s |
Method and standards
Geometry.
Where it is used
- DG set and engine data sheets.
- Examinations.
Common mistakes
- Radius for bore.
- Stroke vs connecting rod length.
Assumptions and limits
- Reciprocating engine.
References
- V_s = (π/4)B²S z; mean piston speed 2SN
Questions and answers
105 × 120 mm, six cylinders at 1500 rpm?
6.23 L total; mean piston speed 6.0 m/s.
Why piston speed?
It limits wear and breathing; diesels often run 8–12 m/s.
cc?
1 L = 1000 cc.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.