FireCADCalc

Compression Ratio and Clearance Volume

Compression ratio from swept and clearance volumes, or the clearance volume needed for a target compression ratio.

Inputs

Examples: 1.039 L, 69.3 mLPetrol 0.5 L, 60 mL

Results

Compression ratio (V_s + V_c)/V_c15.993
Clearance for the target0.064937L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1.039 L, 69.3 mL. The inputs, in the units selected above:

InputValue
Swept volume per cylinder1.0390 L
Clearance volume0.069300 L
Target compression ratio17.000 -

Applying the formula below gives:

ResultValue
Compression ratio (V_s + V_c)/V_c15.993
Clearance for the target0.064937 L

Open this example in the calculator and change any input.

Formula

\(r = \frac{V_s + V_c}{V_c}, \quad V_c = \frac{V_s}{r - 1}\)

Variables

Symbol Meaning SI unit
\(V_s\) Swept volume per cylinder m³
\(V_c\) Clearance volume m³
\(r_t\) Target compression ratio -
\(r\) Compression ratio (V_s + V_c)/V_c -
\(V_{c,t}\) Clearance for the target m³

Method and standards

Geometry.

Where it is used

  • Engine overhaul checks.
  • Examinations.

Common mistakes

  • Total displacement with per-cylinder clearance.
  • mL vs L.

Assumptions and limits

  • One cylinder.
  • Static (geometric) ratio. The effective ratio is lower when the inlet valve closes late (Miller and Atkinson timing), and is not computed.

References

  • r = (V_s + V_c)/V_c

Questions and answers

1.039 L swept with 69.3 mL clearance?

r = 16.0.

Clearance for 17:1?

64.9 mL.

Higher ratio?

Better efficiency, but more pressure and, in petrol engines, knock.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.