FireCADCalc

Brake Power by Rope Brake Dynamometer

Brake torque and brake power of an engine from a rope brake test (dead load, spring balance reading, drum and rope diameters, speed).

Boiler operation engineer (BOE) examinations

Inputs

Examples: Lab engine 600 rpmSmall engine 1500 rpm

Results

Brake torque (W − S) g (D + d)/2209.08N·m
Brake power13.137kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Lab engine 600 rpm. The inputs, in the units selected above:

InputValue
Dead load (mass hung on the rope; force = W g)60.000 kg
Spring balance reading (in kg, i.e. kgf; force = S g)8.0000 kg
Brake drum diameter0.80000 m
Rope diameter20.000 mm
Engine speed600.00 rpm

Applying the formula below gives:

ResultValue
Brake torque (W − S) g (D + d)/2209.08 N·m
Brake power13.137 kW

Open this example in the calculator and change any input.

Formula

\(T = (W - S)g\frac{D + d}{2}, \quad BP = 2\pi N T\)

Variables

Symbol Meaning SI unit
\(W\) Dead load (mass hung on the rope; force = W g) kg
\(S\) Spring balance reading (in kg, i.e. kgf; force = S g) kg
\(D\) Brake drum diameter m
\(d\) Rope diameter m
\(N\) Engine speed 1/s
\(T\) Brake torque (W − S) g (D + d)/2 N·m
\(BP\) Brake power W

Method and standards

Statics.

Where it is used

  • Engine testing laboratories.
  • BOE and engineering examinations.

Common mistakes

  • Drum radius without the rope.
  • rpm in the formula without /60.

Assumptions and limits

  • Steady speed.
  • Dead load and spring reading are entered as masses (kg, or the kgf the balance reads) and turned into forces with standard gravity.

References

  • Rope brake: T = (W − S)g(D + d)/2; BP = 2πNT

Questions and answers

60 kg load, 8 kg spring, 0.8 m drum, 20 mm rope, 600 rpm?

Torque 209.1 N·m, BP 13.14 kW.

Why add the rope diameter?

The load acts at the rope's centre line.

Cooling?

Rope brakes heat up; water-cool the drum in long tests.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.